[c-nsp] 7200 port adapters

[Gert Doering]

Hi,

On Tue, Oct 11, 2005 at 04:16:04PM +0200, Fredrik.Jacobsson at enskilda.se wrote:
> Slot 6 contains a PA-2FE-TX where one port is shut. Should take 200 points.

The bandwidth points are calculated for "both ports are fully utilized"
- that's a theoretical value to tell you "if you oversubscribe your
router by putting in more interfaces that it can handle, be aware that
not all interfaces will be able to run at full speed at the same time".

Whether or not the port is enabled isn't taken into account for BW point
calculation.

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de