[c-nsp] 7200 port adapters

[Fredrik.Jacobsson at enskilda.se]

Hi!

We have two 7206VXR with NPE-G1's where we yesterday inserted PA-2FE-TX's.
So now they look like this:

Slot 1 contains a VAM2-module, taking 600 bandwidth points.
Slot 2 contains a PA-4T+ taking  0 points.
Slot 4 contains a PA-E3 taking 90 points.
Slot 6 contains a PA-2FE-TX where one port is shut. Should take 200 points.

A show version shows:

PCI bus mb1 (Slots 1, 3 and 5) has an aggregate of 600 bandwidth points.
Total of 600 bandwidth points have been used on PCI bus mb1.
PA's ( ) has/have over subscribed 0 bandwidth points in single port
configuration on PCI bus mb1.
PCI bus mb2 (Slots 2, 4, 6) has an aggregate of 600 bandwidth points.
Total of 290 bandwidth points have been used on PCI bus mb2.
PA's (PA-2FE =  400) has/have over subscribed 200 bandwidth points in single
port configuration on PCI bus mb2.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on CCO <www.cisco..

Ehh...here it says that my PA-2FE-TX takes 400. Is it a display thing, or do
I need to
deactive one port on another way than doing a shut? It should only take 400
points
if I use both ports, which I dont.

Whyy? :)

Thanks
/Fredrik


**********************************************************************************************************************
Confidentiality Notice

The content of this message, including attachments, is intended for the confidential use of the individual(s) or entity(-ies) to whom it is addressed only and may contain personal and/or confidential information. Please notify the sender immediately by returning this message if you are not the intended recipient. If you are not the intended recipient, you are hereby notified that you have received this communication in error and that reading, duplicating, or in any way disseminating its content to any other person, is strictly prohibited.

If the content of this message, including attachments, includes an offer to provide any service or product, an offer or a solicitation of an offer to buy or sell any securities or any other investment product, please refer to the disclaimer on www.enskilda.se, which applies also to the content of this message. Any such transaction will also be subject to any other Terms of Business currently in place between us.

If you are a client of Enskilda Securities with access to Enskilda Research Online and this message contains a research report or the content of this message, including attachments, may be regarded as an advice in relation to companies or securities, please refer to the general and company specific disclaimers, respectively, on Enskilda Research Online.
**********************************************************************************************************************