[c-nsp] memory-size iomem (7200 series)

[Robert E.Seastrom]

Ed Ravin <eravin at panix.com> writes:

> On Wed, Oct 12, 2005 at 12:34:54PM -0400, Rodney Dunn wrote:
>> As long as you have one that fits what difference
>> does it make?
>
> The problem is, there is no image on CCO that fits.  I've got a
> couple of 7206 boxes with NPE-225 and 4 MB of flash on the I/O
> controller.  The bootflash is now officially useless, since it
> crashes upon startup and punts to the boot image in one of the PCMCIA
> slots.  There is no bootflash on CCO that supports NPE-225 that
> also fits in 4 MB.  I'm told 12.0(16)S would work, but I can't get
> it from CCO, and the 12.0(26)S and above bootflashes that are on CCO
> are all too big to install in 4 MB.

The way I have worked around that problem is linear flash in slot 0,
ata flash in slot 1, and the following:

ar01#dir slot0:
Directory of slot0:/

    1  -rw-     7246548  Oct 25 2004 18:27:53 +00:00  c7200-kboot-mz.123-8.T4.bin

7995392 bytes total (748716 bytes free)
ar01#dir disk1:
Directory of disk1:/

    1  -rw-    22416948  Oct 25 2004 11:51:32 +00:00  c7200-js-mz.123-8.T4.bin

256495616 bytes total (234078208 bytes free)
ar01#sho run | inc boot
boot-start-marker
boot system flash disk1:c7200-js-mz.123-8.T4.bin
boot bootldr slot0:c7200-kboot-mz.123-8.T4.bin
boot-end-marker
ar01#

Note that I'm not using the io controller bootflash at all.  This is
with an NPE300.  Also works on an NPE200 in the lab.  Dunno about the
225.


                                        ---Rob