[c-nsp] adding a 3750 to another, 'sdm' stuff?

[Adam Greene]

This URL may also help clarify things ...
http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_tech_note09186a00801e7bb9.shtml

Adam

----- Original Message ----- 
From: "Saku Ytti" <saku+cisco-nsp at ytti.fi>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, October 25, 2005 2:16 PM
Subject: Re: [c-nsp] adding a 3750 to another, 'sdm' stuff?


> On (2005-10-25 20:01 +0200), Alexander Koch wrote:
>
> > How can I ensure the next time this switch will be added
>
> Set all switches to 'desktop' mode.
>
> > normally? And what is SDM?  And why the heck (sorry) cannot
>
> Way to divide the TCAM memory usage.
>
> > the master override the slave (system #2)? I would be so
> > glad if I could get around the reload of the master switch.
>
> Your other switch supports 'aggregator' mode, which basicly
> means larger TCAM, other switch does not have this large TCAM,
> so only way to make them compatible, is to 'downgrade' the aggregator
> to desktop profile.
>
> > Also any word of advice on what sdm setting is best used for
> > a L2 switch?
>
> 'show sdp prefer ?' to give you rough clue about what's supported
> in each profile.
>
> > I understand that any switch has to be rebooted when I
> > change SDM settings?
>
> Correct, same thing as for MTU changes or internal vlan allocation
> policy.
>
> -- 
>   ++ytti
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> ---
> [This e-mail was scanned for viruses by Webjogger's AntiVirus Protection
System]
>
>

---
[This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]