[c-nsp] Same PE as global next-hop for VRF route

[Ian Dickinson]

Everton da Silva Marques wrote:
> Would the ability to use a global address of the
> local PE as global next-hop for VRF routes be
> a reasonable feature request?

I'm not sure how CEF would handle this, but I'd like this.

E.g. when I use

 ip route vrf VRFNAME 10.20.2.0 255.255.255.224 10.20.2.0 global

remote traffic can reach all of 10.20.2.0/27 except the local
PE's own interface.  To get full coverage, I need 2 nodes doing
this function.
-- 
Ian Dickinson
Development Engineer
PIPEX
ian.dickinson at pipex.net
http://www.pipex.net

This e-mail is subject to: http://www.pipex.net/disclaimer.html