[c-nsp] 2950 QoS

[Anton Yurchenko]

What you may be looking for is SRR, shaped round robin, which can shape
the traffic to a certain percentage of bandwidth, and not let it exceed
it. It is not supported 2950, look at 3750 and above, they have this
feature.

Joe Shen wrote:

>I noticed that WRR shedule the bandwidth according toreal b.w.demanded by each service class. If DSCP010000 is allowed to use 10% of total b.w., while realvolume of that service class is only 5% of total b.w,b.w. could be shared by other code point. This means,best-effort traffic may experience the same servicequality. 
>Is that possible to hard limit the b.w. allocated to aDSCP/TOS code point?
> --- lists at hojmark.org:
>  
>
>>>Does anybody know what commands are necessary to> enable > > layer2 QoS on a 2950?> > If all you want is QoS for Cisco phones, take a look> at AutoQoS:> http://tinyurl.com/atapg> > -A> PS: Only works on EI switches, however.> > _______________________________________________> cisco-nsp mailing list  cisco-nsp at puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-nsp> archive at> http://puck.nether.net/pipermail/cisco-nsp/> 
>>>      
>>>
>
>
>	
>			___________________________________________________________ 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com
>_______________________________________________cisco-nsp mailing list  cisco-nsp at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-nsparchive at http://puck.nether.net/pipermail/cisco-nsp/
>
>  
>