[c-nsp] 7600 switchover
Kim Onnel
karim.adel at gmail.com
Mon Sep 5 10:10:08 EDT 2005
Is there specific configuration needed or is it by default to have RPR+
established,
Also, what if i am using the Gig. interface on the standby module, would
that break RPR+ ?
On 9/4/05, rafi-cnsp at meron.openu.ac.il <rafi-cnsp at meron.openu.ac.il> wrote:
>
> Hi Kim,
>
> You may have noticed these messages in the log
> Sep 4 13:31:01 gw-87 76: Sep 4 13:27:36: %PFREDUN-SP-4-VERSION_MISMATCH:
> Defaulting to RPR mode (Different software versions)
> Sep 4 13:31:01 gw-87 77: Sep 4 13:27:37: %PFREDUN-SP-6-ACTIVE:
> Standby initializing for RPR mode
>
> And the IOS versions:
> Slot 2+3 FlexWAN are running 12.2(18)SXD
> Slot 5 sup720 is running 12.2(18)SXD
> Slot 6 sup720 is running 12.2(14)SX1 <-----
>
> IMHO You may want to upgrade the sup in slot 6 to IOS 12.2(18)SXD
>
> You may also want to have a look at:
> <
> http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_configuration_guide_chapter09186a0080160a91.html
> ?
>
> --
> HTH,
> Rafi
>
>
> On Sun, 4 Sep 2005, Kim Onnel wrote:
>
> > Date: Sun, 4 Sep 2005 17:56:01 +0300
> > From: Kim Onnel <karim.adel at gmail.com>
> > To: Cisco-NSP Mailing List <cisco-nsp at puck.nether.net>
> > Subject: [c-nsp] 7600 switchover
> >
> > Hi,
> >
> > I am running a 7609 with the following modules:
> >
> > Mod Ports Card Type Model Serial No.
> > --- ----- -------------------------------------- ------------------
> > -----------
> > 3 0 2 port adapter FlexWAN WS-X6182-2PA JAB081508NX
> > 4 0 2 port adapter FlexWAN WS-X6182-2PA JAB081508QU
> > 5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD081408YM
> > 6 2 Supervisor Engine 720 (Cold) WS-SUP720-BASE SAD081502HK
> >
> > Mod MAC addresses Hw Fw Sw Status
> > --- ---------------------------------- ------ ------------ ------------
> > -------
> > 3 000f.3416.5d10 to 000f.3416.5d4f 1.6 12.2(18)SXD 12.2(18)SXD Ok
> > 4 000f.f704.a4a0 to 000f.f704.a4df 1.6 12.2(18)SXD 12.2(18)SXD Ok
> > 5 000d.bda3.e9bc to 000d.bda3.e9bf 3.1 7.7(1) 12.2(18)SXD Ok
> > 6 000d.2910.4b08 to 000d.2910.4b0b 3.1 7.7(1) 12.2(14)SX1 Ok
> >
> > Mod Sub-Module Model Serial Hw Status
> > --- --------------------------- ------------------ ------------ -------
> > -------
> > 5 Policy Feature Card 3 WS-F6K-PFC3A SAD081407SY 2.2 Ok
> > 5 MSFC3 Daughterboard WS-SUP720 SAD081503XR 2.2 Ok
> > 6 Policy Feature Card 3 WS-F6K-PFC3A SAD0815053L 2.2 Ok
> > 6 MSFC3 Daughterboard WS-SUP720 SAD0815049W 2.2 Ok
> >
> > Mod Online Diag Status
> > --- -------------------
> > 3 Pass
> > 4 Pass
> > 5 Pass
> > 6 Pass
> >
> >
> > If i understand correctly, Hot standby is when full redundancy between 2
> > modules(Supervisor) is achieved, redundancy for processing and traffic,
> but
> > the cold standby is when its not full redundant and it happens when
> state
> > information is not sent from Active to cold for some reason ?
> >
> > My active Sup720 is in module 5, because of some power problem this
> morning,
> > it switched to module 6, as you can see from the log below, all BGP
> peers
> > went down, and module 6 took place
> >
> > I asked TAC if i can use the port on the standby module and they
> confirmed,
> > so i put an Internet link on the Giga6/1 interface on the standby sup,
> with
> > a BGP peer up, could that break the redundancy rule ? meaning, if i use
> the
> > port on the standby and switching between modules takes place, should
> the
> > gig on the standby be still working ?
> >
> > When it switched active from 5 to 6, some ports on the flexwans didnt
> work
> > and the Gig6/1 too
> >
> > Below are the logs:
> >
> > Log Buffer (8192 bytes):
> >
> > UN-SP-STDBY-6-ACTIVE: Initializing as ACTIVE processor
> > 7w2d: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type
> vlan
> > 7w2d: SP: SP: Currently running ROMMON from S (Gold) region
> > 7w2d: %SYS-SP-5-RESTART: System restarted --
> > Cisco Internetwork Operating System Software
> > IOS (tm) s72033_sp Software (s72033_sp-SPV-M), Version 12.2(14)SX1,
> EARLY
> > DEPLOYMENT RELEASE SOFTWARE (fc1)
> > TAC Support: http://www.cisco.com/tac
> > Copyright (c) 1986-2003 by cisco Systems, Inc.
> > Compiled Tue 27-May-03 19:32 by ccai
> >
> > *Sep 4 08:05:00: %OIR-SP-6-INSPS: Power supply inserted in slot 1
> > *Sep 4 08:05:00: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
> > *Sep 4 08:05:00: %OIR-SP-6-INSPS: Power supply inserted in slot 2
> > *Sep 4 08:05:00: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
> > *Sep 4 08:05:00: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy
> > mode, system is operating on both power supplies.
> > *Sep 4 11:05:03: %MLS_RATE-4-OVERWRITING_VALUE: Overwriting the rate
> value
> > for: VACL LOG casecalling scp_getver_req, len = 242
> >
> > *Sep 4 11:05:04: %OIR-6-REMCARD: Card removed from slot 3, interfaces
> > disabled
> > *Sep 4 11:05:04: %OIR-6-REMCARD: Card removed from slot 3, interfaces
> > disabled
> > *Sep 4 11:05:04: %OIR-6-REMCARD: Card removed from slot 4, interfaces
> > disabled
> > *Sep 4 11:05:04: %OIR-6-REMCARD: Card removed from slot 4, interfaces
> > disabled
> > *Sep 4 08:05:03: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: the switching fabric
> > module in slot 6 became active
> > *Sep 4 11:05:04: %OIR-SP-6-INSCARD: Card inserted in slot 6, interfaces
> are
> > now online
> > *Sep 4 11:05:33: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimum
> > Diagnostics...
> > *Sep 4 11:05:33: %DIAG-SP-6-DIAG_OK: Module 3: Passed Online Diagnostics
> > *Sep 4 11:05:33: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimum
> > Diagnostics...
> > *Sep 4 11:05:33: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
> > *Sep 4 11:05:33: %OIR-SP-6-INSCARD: Card inserted in slot 3, interfaces
> are
> > now online
> > *Sep 4 11:05:34: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces
> are
> > now online
> > Sep 4 11:05:35: %SONET-4-ALARM: POS3/1/0: B2 BER exceeds threshold, TC
> alarm
> > declared
> > Sep 4 11:05:35: %SONET-4-ALARM: POS3/1/0: B3 BER exceeds threshold, TC
> alarm
> > declared
> > Sep 4 11:05:36: %SONET-4-ALARM: POS4/0/0: B2 BER exceeds threshold, TC
> alarm
> > declared
> > Sep 4 11:05:36: %SONET-4-ALARM: POS4/0/0: B3 BER exceeds threshold, TC
> alarm
> > declared
> > Sep 4 11:05:38: %BGP-5-ADJCHANGE: neighbor xx.77.0.109 Up
> > Sep 4 11:05:43: %BGP-3-NOTIFICATION: received from neighbor xx.216.142.56/5
> > (cease) 0 bytes
> > Sep 4 11:05:44: %BGP-5-ADJCHANGE: neighbor xx.77.0.129 Up
> > Sep 4 11:05:45: %SONET-4-ALARM: POS3/1/0: B2 BER below threshold, TC
> alarm
> > cleared
> > Sep 4 11:05:45: %SONET-4-ALARM: POS3/1/0: B3 BER below threshold, TC
> alarm
> > cleared
> > Sep 4 11:05:46: %SONET-4-ALARM: POS4/0/0: B2 BER below threshold, TC
> alarm
> > cleared
> > Sep 4 11:05:46: %SONET-4-ALARM: POS4/0/0: B3 BER below threshold, TC
> alarm
> > cleared
> > Sep 4 11:05:48: %BGP-5-ADJCHANGE: neighbor xx.216.133.1 Up Active SP has
> > (458752/65536K) memory, Standby SP (458720/65536K).
> > Active RP has (458752/65536K) memory, Standby RP (458720/65536K).
> >
> > Sep 4 11:06:19: %PFREDUN-SP-4-VERSION_MISMATCH: Defaulting to RPR mode
> > (Different software versions)
> > Sep 4 11:06:20: %BGP-5-ADJCHANGE: neighbor xx.216.142.5 Up
> > 7w2d: SP:
> > Cisco Internetwork Operating System Software
> > IOS (tm) s72033_sp Software (s72033_sp-SPV-M), Version 12.2(14)SX1,
> EARLY
> > DEPLOYMENT RELEASE SOFTWARE (fc1)
> > TAC Support: http://www.cisco.com/tac
> > Copyright (c) 1986-2003 by cisco Systems, Inc.
> > Compiled Tue 27-May-03 19:32 by ccai
> > Cisco Internetwork Operating System Software
> > IOS (tm) s72033_sp Software (s72033_sp-PSV-M), Version 12.2(18)SXD,
> RELEASE
> > SOFTWARE (fc2)
> > Technical Support: http://www.cisco.com/techsupport
> > Copyright (c) 1986-2004 by cisco Systems, Inc.
> > Compiled Wed 28-Jul-04 22:40 by cmong
> >
> >
> > Sep 4 11:06:20: %PFREDUN-SP-6-ACTIVE: Standby initializing for RPR mode
> > Sep 4 11:06:21: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing the startup
> configuration
> > to the standby Router
> > Sep 4 11:06:25: %FABRIC-SP-5-FABRIC_MODULE_BACKUP: the switching fabric
> > module in slot 5 became standby
> > Sep 4 11:06:26: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimum
> > Diagnostics...
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on
> (Active).
> > Sep 4 11:06:26: %CHKPT-SP-4-INVALID: Invalid checkpoint client ID on
> > (Active).
> > Sep 4 11:06:26: %CHKPT-SP-4-INVALID: Invalid checkpoint client ID on
> > (Active).
> > Sep 4 11:06:26: %CHKPT-SP-4-INVALID: Invalid checkpoint client ID on
> > (Active).
> > Sep 4 11:06:26: %CHKPT-SP-4-INVALID: Invalid checkpoint client ID on
> > (Active).
> > Sep 4 11:06:28: %DIAG-SP-6-DIAG_OK: Module 5: Passed Online Diagnostics
> > Sep 4 11:06:28: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces
> are
> > now online
> > Sep 4 11:06:38: %BGP-5-ADJCHANGE: neighbor xx.212.255.34 Up
> > Sep 4 11:07:04: %OSPF-5-ADJCHG: Process 1, Nbr xx.240.110.85 on
> > GigabitEthernet5/1 from LOADING to FULL, Loading Done
> > Sep 4 11:11:14 gw-87 80: Sep 4 11:07:29: %BGP-5-ADJCHANGE: neighbor
> > xx.129.254.129 Up
> > Sep 4 11:11:23 gw-87 81: Sep 4 11:07:39: %BGP-5-ADJCHANGE: neighbor
> > xx.240.110.78 Up
> > Sep 4 11:11:32 gw-87 83: Sep 4 11:07:45: %BGP-5-ADJCHANGE: neighbor
> > xx.240.110.85 Up
> > Sep 4 11:11:35 gw-87 84: Sep 4 11:07:50: %BGP-5-ADJCHANGE: neighbor
> > xx.240.110.84 Up
> > Sep 4 11:11:37 gw-87 85: Sep 4 11:07:53: %BGP-5-ADJCHANGE: neighbor
> > 196.204.120.96 <http://196.204.120.96> <http://196.204.120.96> Up
> > Sep 4 11:11:41 gw-87 86: Sep 4 11:07:57: %SNMP-5-COLDSTART: SNMP agent
> on
> > host 7600 is undergoing a cold start
> > Sep 4 11:12:31 gw-87 88: Sep 4 11:08:48: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:13:18 gw-87 90: Sep 4 11:09:34: %BGP-5-ADJCHANGE: neighbor
> > 172.16.113.120 <http://172.16.113.120> <http://172.16.113.120> Up
> > Sep 4 11:16:46 gw-87 94: Sep 4 11:13:03: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:17:20 gw-87 96: Sep 4 11:13:37: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:17:25 gw-87 97: Sep 4 11:13:42: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:17:49 gw-87 99: Sep 4 11:14:05: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:17:49 gw-87 100: Sep 4 11:14:06: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:21:56 gw-87 106: Sep 4 11:18:12: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:24:33 gw-87 109: Sep 4 11:20:50: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:27:26 gw-87 112: Sep 4 11:24:12: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:37:06 gw-87 121: Sep 4 11:33:52: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:43:01 gw-87 127: Sep 4 11:39:47: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:43:26 gw-87 128: Sep 4 11:40:12: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:48:25 gw-87 134: Sep 4 11:45:11: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:52:15 gw-87 137: Sep 4 11:49:01: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 11:53:39 gw-87 138: Sep 4 11:50:25: %BGP-5-ADJCHANGE: neighbor
> > xx.77.0.109 Down Interface flap
> > Sep 4 11:59:01 gw-87 141: Sep 4 11:55:47: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 12:47:00 gw-87 145: Sep 4 12:43:46: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 12:48:39 gw-87 146: Sep 4 12:45:25: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 13:15:59 gw-87 151: Sep 4 13:12:45: %REDUNDANCY-3-IPC: cannot open
> > standby port no such port
> > Sep 4 13:28:09 gw-87 152: Sep 4 13:24:55: %BGP-5-ADJCHANGE: neighbor
> > xx.216.133.1 Down Admin. shutdown
> > Sep 4 13:28:09 gw-87 153: Sep 4 13:24:55: %BGP-5-ADJCHANGE: neighbor
> > xx.216.142.5 Down Admin. shutdown
> > Sep 4 13:28:09 gw-87 154: Sep 4 13:24:55: %BGP-5-ADJCHANGE: neighbor
> > xx.77.0.129 Down Admin. shutdown
> > Sep 4 13:29:23 gw-87 65: Sep 4 13:26:07: %BGP-5-ADJCHANGE: neighbor
> > xx.129.254.129 Up
> > Sep 4 13:29:25 gw-87 66: Sep 4 13:26:08: %BGP-5-ADJCHANGE: neighbor
> > 196.204.120.96 <http://196.204.120.96> <http://196.204.120.96> Up
> > Sep 4 13:29:28 gw-87 67: Sep 4 13:26:12: %BGP-5-ADJCHANGE: neighbor
> > xx.216.142.5 Up
> > Sep 4 13:29:34 gw-87 68: Sep 4 13:26:17: %BGP-5-ADJCHANGE: neighbor
> > xx.77.0.129 Up
> > Sep 4 13:29:35 gw-87 69: Sep 4 13:26:18: %BGP-5-ADJCHANGE: neighbor
> > xx.216.133.1 Up
> > Sep 4 13:30:21 gw-87 71: Sep 4 13:26:54: %BGP-5-ADJCHANGE: neighbor
> > xx.240.110.78 Up
> > Sep 4 13:30:21 gw-87 72: Sep 4 13:27:01: %BGP-5-ADJCHANGE: neighbor
> > xx.129.216.253 Up
> > Sep 4 13:30:21 gw-87 73: Sep 4 13:27:01: %BGP-5-ADJCHANGE: neighbor
> > xx.240.110.84 Up
> > Sep 4 13:31:01 gw-87 74: Sep 4 13:27:36: %PFREDUN-SP-4-PHYSMEM_MISMATCH:
> > Asymmetrical redundant configuration: Active SP has (458720/65536K)
> memory,
> > Standby has (458752/65536K).
> > Sep 4 13:31:01 gw-87 75: Sep 4 13:27:36: %PFREDUN-SP-4-PHYSMEM_MISMATCH:
> > Asymmetrical redundant configuration: Active RP has (458720/65536K)
> memory,
> > Standby has (458752/65536K).
> > Sep 4 13:31:01 gw-87 76: Sep 4 13:27:36: %PFREDUN-SP-4-VERSION_MISMATCH:
> > Defaulting to RPR mode (Different software versions)
> > Sep 4 13:31:01 gw-87 77: Sep 4 13:27:37: %PFREDUN-SP-6-ACTIVE: Standby
> > initializing for RPR mode
> > Sep 4 13:31:01 gw-87 78: Sep 4 13:27:38: %HA_CONFIG_SYNC-3-IPC: cannot
> open
> > standby port no such port
> > Sep 4 13:31:01 gw-87 79: Sep 4 13:27:38: %HA_CONFIG_SYNC-3-IPC: cannot
> open
> > standby port no such port
> > Sep 4 13:31:01 gw-87 80: Sep 4 13:27:38: %HA_CONFIG_SYNC-3-IPC: cannot
> open
> > standby port no such port
> > Sep 4 13:31:01 gw-87 81: Sep 4 13:27:38: %HA_CONFIG_SYNC-3-IPC: cannot
> open
> > standby port no such port
> > Sep 4 13:31:01 gw-87 82: Sep 4 13:27:38: %IPC-3-APP_IPC_FAIL: Open ipc
> port
> > IPC-Apps:Standby failed. IPC Error: no such port (7)
> > Sep 4 13:31:01 gw-87 83: -Traceback= 4044267C 404426C8 40442A5C 405DDBAC
> > 405D6850 405D7684
> > Sep 4 13:31:01 gw-87 84: Sep 4 13:27:38: %SYS-SP-3-LOGGER_FLUSHED:
> System
> > was paused for 00:00:00 to ensure console debugging output.
> > Sep 4 13:31:01 gw-87 85:
> > Sep 4 13:31:03 gw-87 86: Sep 4 13:27:39:
> %FABRIC-SP-5-FABRIC_MODULE_BACKUP:
> > The Switch Fabric Module in slot 6 became standby
> > Sep 4 13:31:21 gw-87 87: Sep 4 13:27:41: %DIAG-SP-6-RUN_MINIMUM: Module
> 6:
> > Running Minimum Diagnostics...
> > Sep 4 13:31:21 gw-87 88: Sep 4 13:27:43: %MLS_RATE-4-DISABLING: The
> Layer2
> > Rate Limiters have been disabled.
> > Sep 4 13:31:21 gw-87 89: Sep 4 13:27:42: %DIAG-SP-6-DIAG_OK: Module 6:
> > Passed Online Diagnostics
> > Sep 4 13:31:21 gw-87 90: Sep 4 13:27:43: %OIR-SP-6-INSCARD: Card
> inserted in
> > slot 6, interfaces are now online
> > Sep 4 13:31:21 gw-87 91: Sep 4 13:27:49: %PFINIT-SP-5-CONFIG_SYNC:
> Sync'ing
> > the startup configuration to the standby Router
> > Sep 4 13:31:21 gw-87 92: Sep 4 13:27:49: %PFINIT-SP-1-CONFIG_SYNC_FAIL:
> > Sync'ing the startup configuration to the standby Router FAILED
> > Sep 4 13:31:21 gw-87 93: Sep 4 13:27:49: %PFINIT-SP-1-CONFIG_SYNC_FAIL:
> > Sync'ing the private configuration to the standby Router FAILED
> > Sep 4 13:31:21 gw-87 94: Sep 4 13:27:49: %PFINIT-SP-1-CONFIG_SYNC_FAIL:
> > Sync'ing the startup configuration to the standby Router FAILED
> > Sep 4 13:31:21 gw-87 95: Sep 4 13:27:49: %PFINIT-SP-1-CONFIG_SYNC_FAIL:
> > Sync'ing the private configuration to the standby Router FAILED
> > Sep 4 13:31:21 gw-87 96: Sep 4 13:27:49: %OIR-SP-3-PWRCYCLE: Card in
> module
> > 6, is being power-cycled (RF request)
> > Sep 4 13:31:21 gw-87 97: Sep 4 13:27:49:
> %PFREDUN-SP-4-BOOTSTRING_INVALID:
> > The bootfile slavesup-bootflash: is not present in standby
> > Sep 4 13:31:22 gw-87 98: Sep 4 13:27:50: %PFREDUN-SP-6-ACTIVE: Standby
> > processor removed or reloaded, changing to Simplex mode
> > Sep 4 13:31:24 gw-87 99: Sep 4 13:28:01: %BGP-5-ADJCHANGE: neighbor
> > 172.16.113.120 <http://172.16.113.120> <http://172.16.113.120> Up
> > Sep 4 13:31:50 gw-87 101: Sep 4 13:28:33: %EARL_L3_ASIC-SP-3-INTR_WARN:
> EARL
> > L3 ASIC: Non-fatal interrupt Packet Parser block interrupt
> > Sep 4 13:31:51 gw-87 102: Sep 4 13:28:35: %TAC-4-SERVREF: Warning:
> Server
> > 172.31.10.14:0 <http://172.31.10.14:0> <http://172.31.10.14:0> is still
> referenced by server group.
> > Sep 4 13:32:03 gw-87 103: Sep 4 13:28:46: %MLS_STAT-SP-4-IP_LEN_ERR:
> MAC/IP
> > length inconsistencies
> > Sep 4 13:32:44 gw-87 105: Sep 4 13:29:27:
> %PFREDUN-SP-4-PHYSMEM_MISMATCH:
> > Asymmetrical redundant configuration: Active SP has (458720/65536K)
> memory,
> > Standby has (458752/65536K).
> > Sep 4 13:32:44 gw-87 106: Sep 4 13:29:27:
> %PFREDUN-SP-4-PHYSMEM_MISMATCH:
> > Asymmetrical redundant configuration: Active RP has (458720/65536K)
> memory,
> > Standby has (458752/65536K).
> > Sep 4 13:32:44 gw-87 107: Sep 4 13:29:27:
> %PFREDUN-SP-4-VERSION_MISMATCH:
> > Defaulting to RPR mode (Different software versions)
> > Sep 4 13:32:44 gw-87 108: Sep 4 13:29:28: %PFREDUN-SP-6-ACTIVE: Standby
> > initializing for RPR mode
> > Sep 4 13:32:45 gw-87 109: Sep 4 13:29:29: %HA_CONFIG_SYNC-3-IPC: cannot
> open
> > standby port no such port
> > Sep 4 13:32:45 gw-87 110: Sep 4 13:29:29: %HA_CONFIG_SYNC-3-IPC: cannot
> open
> > standby port no such port
> > Sep 4 13:32:45 gw-87 111: Sep 4 13:29:29: %HA_CONFIG_SYNC-3-IPC: cannot
> open
> > standby port no such port
> > Sep 4 13:32:45 gw-87 112: Sep 4 13:29:29: %HA_CONFIG_SYNC-3-IPC: cannot
> open
> > standby port no such port
> > Sep 4 13:32:45 gw-87 113: Sep 4 13:29:29: %SYS-SP-3-LOGGER_FLUSHED:
> System
> > was paused for 00:00:00 to ensure console debugging output.
> > Sep 4 13:32:45 gw-87 114:
> > Sep 4 13:32:45 gw-87 115: Sep 4 13:29:30: %IPC-3-APP_IPC_FAIL: Open ipc
> port
> > IPC-Apps:Standby failed. IPC Error: no such port (7)
> > Sep 4 13:32:45 gw-87 116: -Traceback= 4044267C 404426C8 40442A5C
> 405DDBAC
> > 405D6850 405D7684
> > Sep 4 13:32:46 gw-87 117: Sep 4 13:29:29:
> %FABRIC-SP-5-FABRIC_MODULE_BACKUP:
> > The Switch Fabric Module in slot 6 became standby
> > Sep 4 13:32:47 gw-87 118: Sep 4 13:29:30: %DIAG-SP-6-RUN_MINIMUM: Module
> 6:
> > Running Minimum Diagnostics...
> > Sep 4 13:32:48 gw-87 119: Sep 4 13:29:32: %MLS_RATE-4-DISABLING: The
> Layer2
> > Rate Limiters have been disabled.
> > Sep 4 13:32:49 gw-87 120: Sep 4 13:29:32: %DIAG-SP-6-DIAG_OK: Module 6:
> > Passed Online Diagnostics
> > Sep 4 13:32:49 gw-87 121: Sep 4 13:29:33: %OIR-SP-6-INSCARD: Card
> inserted
> > in slot 6, interfaces are now online
> > Sep 4 13:33:00 gw-87 123: Sep 4 13:29:41: %PFINIT-SP-5-CONFIG_SYNC:
> Sync'ing
> > the startup configuration to the standby Router
> > Sep 4 13:33:33 gw-87 125: Sep 4 13:30:15: %BGP-5-ADJCHANGE: neighbor
> > xx.77.0.109 Up
> > Sep 4 13:34:59 gw-87 127: Sep 4 13:31:42: %PFINIT-SP-5-CONFIG_SYNC:
> Sync'ing
> > the startup configuration to the standby Router
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
More information about the cisco-nsp
mailing list