[c-nsp] 7600 switchover

Sun Sep 4 16:25:38 EDT 2005

Hi Kim,

You may have noticed these messages in the log
   Sep 4 13:31:01 gw-87 76: Sep 4 13:27:36: %PFREDUN-SP-4-VERSION_MISMATCH:
 	 Defaulting to RPR mode (Different software versions)
   Sep 4 13:31:01 gw-87 77: Sep 4 13:27:37: %PFREDUN-SP-6-ACTIVE:
 	Standby initializing for RPR mode

And the IOS versions:
  Slot 2+3 FlexWAN are running 12.2(18)SXD
  Slot 5 sup720 is running 12.2(18)SXD
  Slot 6 sup720 is running 12.2(14)SX1  <-----

IMHO You may want to upgrade the sup in slot 6 to IOS 12.2(18)SXD

You may also want to have a look at:
<http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_configuration_guide_chapter09186a0080160a91.html?

-- 
HTH,
 	Rafi

On Sun, 4 Sep 2005, Kim Onnel wrote:

> Date: Sun, 4 Sep 2005 17:56:01 +0300
> From: Kim Onnel <karim.adel at gmail.com>
> To: Cisco-NSP Mailing List <cisco-nsp at puck.nether.net>
> Subject: [c-nsp] 7600 switchover
> 
> Hi,
>
> I am running a 7609 with the following modules:
>
> Mod Ports Card Type Model Serial No.
> --- ----- -------------------------------------- ------------------
> -----------
> 3 0 2 port adapter FlexWAN WS-X6182-2PA JAB081508NX
> 4 0 2 port adapter FlexWAN WS-X6182-2PA JAB081508QU
> 5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD081408YM
> 6 2 Supervisor Engine 720 (Cold) WS-SUP720-BASE SAD081502HK
>
> Mod MAC addresses Hw Fw Sw Status
> --- ---------------------------------- ------ ------------ ------------
> -------
> 3 000f.3416.5d10 to 000f.3416.5d4f 1.6 12.2(18)SXD 12.2(18)SXD Ok
> 4 000f.f704.a4a0 to 000f.f704.a4df 1.6 12.2(18)SXD 12.2(18)SXD Ok
> 5 000d.bda3.e9bc to 000d.bda3.e9bf 3.1 7.7(1) 12.2(18)SXD Ok
> 6 000d.2910.4b08 to 000d.2910.4b0b 3.1 7.7(1) 12.2(14)SX1 Ok
>
> Mod Sub-Module Model Serial Hw Status
> --- --------------------------- ------------------ ------------ -------
> -------
> 5 Policy Feature Card 3 WS-F6K-PFC3A SAD081407SY 2.2 Ok
> 5 MSFC3 Daughterboard WS-SUP720 SAD081503XR 2.2 Ok
> 6 Policy Feature Card 3 WS-F6K-PFC3A SAD0815053L 2.2 Ok
> 6 MSFC3 Daughterboard WS-SUP720 SAD0815049W 2.2 Ok
>
> Mod Online Diag Status
> --- -------------------
> 3 Pass
> 4 Pass
> 5 Pass
> 6 Pass
>
>
> If i understand correctly, Hot standby is when full redundancy between 2
> modules(Supervisor) is achieved, redundancy for processing and traffic, but
> the cold standby is when its not full redundant and it happens when state
> information is not sent from Active to cold for some reason ?
>
> My active Sup720 is in module 5, because of some power problem this morning,
> it switched to module 6, as you can see from the log below, all BGP peers
> went down, and module 6 took place
>
> I asked TAC if i can use the port on the standby module and they confirmed,
> so i put an Internet link on the Giga6/1 interface on the standby sup, with
> a BGP peer up, could that break the redundancy rule ? meaning, if i use the
> port on the standby and switching between modules takes place, should the
> gig on the standby be still working ?
>
> When it switched active from 5 to 6, some ports on the flexwans didnt work
> and the Gig6/1 too
>
> Below are the logs:
>
> Log Buffer (8192 bytes):
>
> UN-SP-STDBY-6-ACTIVE: Initializing as ACTIVE processor
> 7w2d: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
> 7w2d: SP: SP: Currently running ROMMON from S (Gold) region
> 7w2d: %SYS-SP-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) s72033_sp Software (s72033_sp-SPV-M), Version 12.2(14)SX1, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Tue 27-May-03 19:32 by ccai
>
> *Sep 4 08:05:00: %OIR-SP-6-INSPS: Power supply inserted in slot 1
> *Sep 4 08:05:00: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
> *Sep 4 08:05:00: %OIR-SP-6-INSPS: Power supply inserted in slot 2
> *Sep 4 08:05:00: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
> *Sep 4 08:05:00: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy
> mode, system is operating on both power supplies.
> *Sep 4 11:05:03: %MLS_RATE-4-OVERWRITING_VALUE: Overwriting the rate value
> for: VACL LOG casecalling scp_getver_req, len = 242
>
> *Sep 4 11:05:04: %OIR-6-REMCARD: Card removed from slot 3, interfaces
> disabled
> *Sep 4 11:05:04: %OIR-6-REMCARD: Card removed from slot 3, interfaces
> disabled
> *Sep 4 11:05:04: %OIR-6-REMCARD: Card removed from slot 4, interfaces
> disabled
> *Sep 4 11:05:04: %OIR-6-REMCARD: Card removed from slot 4, interfaces
> disabled
> *Sep 4 08:05:03: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: the switching fabric
> module in slot 6 became active
> *Sep 4 11:05:04: %OIR-SP-6-INSCARD: Card inserted in slot 6, interfaces are
> now online
> *Sep 4 11:05:33: %DIAG-SP-6-RUN_MINIMUM: Module 3: Running Minimum
> Diagnostics...
> *Sep 4 11:05:33: %DIAG-SP-6-DIAG_OK: Module 3: Passed Online Diagnostics
> *Sep 4 11:05:33: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimum
> Diagnostics...
> *Sep 4 11:05:33: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
> *Sep 4 11:05:33: %OIR-SP-6-INSCARD: Card inserted in slot 3, interfaces are
> now online
> *Sep 4 11:05:34: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are
> now online
> Sep 4 11:05:35: %SONET-4-ALARM: POS3/1/0: B2 BER exceeds threshold, TC alarm
> declared
> Sep 4 11:05:35: %SONET-4-ALARM: POS3/1/0: B3 BER exceeds threshold, TC alarm
> declared
> Sep 4 11:05:36: %SONET-4-ALARM: POS4/0/0: B2 BER exceeds threshold, TC alarm
> declared
> Sep 4 11:05:36: %SONET-4-ALARM: POS4/0/0: B3 BER exceeds threshold, TC alarm
> declared
> Sep 4 11:05:38: %BGP-5-ADJCHANGE: neighbor xx.77.0.109 Up
> Sep 4 11:05:43: %BGP-3-NOTIFICATION: received from neighbor xx.216.142.5 6/5
> (cease) 0 bytes
> Sep 4 11:05:44: %BGP-5-ADJCHANGE: neighbor xx.77.0.129 Up
> Sep 4 11:05:45: %SONET-4-ALARM: POS3/1/0: B2 BER below threshold, TC alarm
> cleared
> Sep 4 11:05:45: %SONET-4-ALARM: POS3/1/0: B3 BER below threshold, TC alarm
> cleared
> Sep 4 11:05:46: %SONET-4-ALARM: POS4/0/0: B2 BER below threshold, TC alarm
> cleared
> Sep 4 11:05:46: %SONET-4-ALARM: POS4/0/0: B3 BER below threshold, TC alarm
> cleared
> Sep 4 11:05:48: %BGP-5-ADJCHANGE: neighbor xx.216.133.1 Up Active SP has
> (458752/65536K) memory, Standby SP (458720/65536K).
> Active RP has (458752/65536K) memory, Standby RP (458720/65536K).
>
> Sep 4 11:06:19: %PFREDUN-SP-4-VERSION_MISMATCH: Defaulting to RPR mode
> (Different software versions)
> Sep 4 11:06:20: %BGP-5-ADJCHANGE: neighbor xx.216.142.5 Up
> 7w2d: SP:
> Cisco Internetwork Operating System Software
> IOS (tm) s72033_sp Software (s72033_sp-SPV-M), Version 12.2(14)SX1, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Tue 27-May-03 19:32 by ccai
> Cisco Internetwork Operating System Software
> IOS (tm) s72033_sp Software (s72033_sp-PSV-M), Version 12.2(18)SXD, RELEASE
> SOFTWARE (fc2)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2004 by cisco Systems, Inc.
> Compiled Wed 28-Jul-04 22:40 by cmong
>
>
> Sep 4 11:06:20: %PFREDUN-SP-6-ACTIVE: Standby initializing for RPR mode
> Sep 4 11:06:21: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing the startup configuration
> to the standby Router
> Sep 4 11:06:25: %FABRIC-SP-5-FABRIC_MODULE_BACKUP: the switching fabric
> module in slot 5 became standby
> Sep 4 11:06:26: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimum
> Diagnostics...
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-4-INVALID: Invalid checkpoint client ID on (Active).
> Sep 4 11:06:26: %CHKPT-SP-4-INVALID: Invalid checkpoint client ID on
> (Active).
> Sep 4 11:06:26: %CHKPT-SP-4-INVALID: Invalid checkpoint client ID on
> (Active).
> Sep 4 11:06:26: %CHKPT-SP-4-INVALID: Invalid checkpoint client ID on
> (Active).
> Sep 4 11:06:26: %CHKPT-SP-4-INVALID: Invalid checkpoint client ID on
> (Active).
> Sep 4 11:06:28: %DIAG-SP-6-DIAG_OK: Module 5: Passed Online Diagnostics
> Sep 4 11:06:28: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces are
> now online
> Sep 4 11:06:38: %BGP-5-ADJCHANGE: neighbor xx.212.255.34 Up
> Sep 4 11:07:04: %OSPF-5-ADJCHG: Process 1, Nbr xx.240.110.85 on
> GigabitEthernet5/1 from LOADING to FULL, Loading Done
> Sep 4 11:11:14 gw-87 80: Sep 4 11:07:29: %BGP-5-ADJCHANGE: neighbor
> xx.129.254.129 Up
> Sep 4 11:11:23 gw-87 81: Sep 4 11:07:39: %BGP-5-ADJCHANGE: neighbor
> xx.240.110.78 Up
> Sep 4 11:11:32 gw-87 83: Sep 4 11:07:45: %BGP-5-ADJCHANGE: neighbor
> xx.240.110.85 Up
> Sep 4 11:11:35 gw-87 84: Sep 4 11:07:50: %BGP-5-ADJCHANGE: neighbor
> xx.240.110.84 Up
> Sep 4 11:11:37 gw-87 85: Sep 4 11:07:53: %BGP-5-ADJCHANGE: neighbor
> 196.204.120.96 <http://196.204.120.96> Up
> Sep 4 11:11:41 gw-87 86: Sep 4 11:07:57: %SNMP-5-COLDSTART: SNMP agent on
> host 7600 is undergoing a cold start
> Sep 4 11:12:31 gw-87 88: Sep 4 11:08:48: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:13:18 gw-87 90: Sep 4 11:09:34: %BGP-5-ADJCHANGE: neighbor
> 172.16.113.120 <http://172.16.113.120> Up
> Sep 4 11:16:46 gw-87 94: Sep 4 11:13:03: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:17:20 gw-87 96: Sep 4 11:13:37: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:17:25 gw-87 97: Sep 4 11:13:42: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:17:49 gw-87 99: Sep 4 11:14:05: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:17:49 gw-87 100: Sep 4 11:14:06: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:21:56 gw-87 106: Sep 4 11:18:12: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:24:33 gw-87 109: Sep 4 11:20:50: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:27:26 gw-87 112: Sep 4 11:24:12: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:37:06 gw-87 121: Sep 4 11:33:52: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:43:01 gw-87 127: Sep 4 11:39:47: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:43:26 gw-87 128: Sep 4 11:40:12: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:48:25 gw-87 134: Sep 4 11:45:11: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:52:15 gw-87 137: Sep 4 11:49:01: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 11:53:39 gw-87 138: Sep 4 11:50:25: %BGP-5-ADJCHANGE: neighbor
> xx.77.0.109 Down Interface flap
> Sep 4 11:59:01 gw-87 141: Sep 4 11:55:47: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 12:47:00 gw-87 145: Sep 4 12:43:46: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 12:48:39 gw-87 146: Sep 4 12:45:25: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 13:15:59 gw-87 151: Sep 4 13:12:45: %REDUNDANCY-3-IPC: cannot open
> standby port no such port
> Sep 4 13:28:09 gw-87 152: Sep 4 13:24:55: %BGP-5-ADJCHANGE: neighbor
> xx.216.133.1 Down Admin. shutdown
> Sep 4 13:28:09 gw-87 153: Sep 4 13:24:55: %BGP-5-ADJCHANGE: neighbor
> xx.216.142.5 Down Admin. shutdown
> Sep 4 13:28:09 gw-87 154: Sep 4 13:24:55: %BGP-5-ADJCHANGE: neighbor
> xx.77.0.129 Down Admin. shutdown
> Sep 4 13:29:23 gw-87 65: Sep 4 13:26:07: %BGP-5-ADJCHANGE: neighbor
> xx.129.254.129 Up
> Sep 4 13:29:25 gw-87 66: Sep 4 13:26:08: %BGP-5-ADJCHANGE: neighbor
> 196.204.120.96 <http://196.204.120.96> Up
> Sep 4 13:29:28 gw-87 67: Sep 4 13:26:12: %BGP-5-ADJCHANGE: neighbor
> xx.216.142.5 Up
> Sep 4 13:29:34 gw-87 68: Sep 4 13:26:17: %BGP-5-ADJCHANGE: neighbor
> xx.77.0.129 Up
> Sep 4 13:29:35 gw-87 69: Sep 4 13:26:18: %BGP-5-ADJCHANGE: neighbor
> xx.216.133.1 Up
> Sep 4 13:30:21 gw-87 71: Sep 4 13:26:54: %BGP-5-ADJCHANGE: neighbor
> xx.240.110.78 Up
> Sep 4 13:30:21 gw-87 72: Sep 4 13:27:01: %BGP-5-ADJCHANGE: neighbor
> xx.129.216.253 Up
> Sep 4 13:30:21 gw-87 73: Sep 4 13:27:01: %BGP-5-ADJCHANGE: neighbor
> xx.240.110.84 Up
> Sep 4 13:31:01 gw-87 74: Sep 4 13:27:36: %PFREDUN-SP-4-PHYSMEM_MISMATCH:
> Asymmetrical redundant configuration: Active SP has (458720/65536K) memory,
> Standby has (458752/65536K).
> Sep 4 13:31:01 gw-87 75: Sep 4 13:27:36: %PFREDUN-SP-4-PHYSMEM_MISMATCH:
> Asymmetrical redundant configuration: Active RP has (458720/65536K) memory,
> Standby has (458752/65536K).
> Sep 4 13:31:01 gw-87 76: Sep 4 13:27:36: %PFREDUN-SP-4-VERSION_MISMATCH:
> Defaulting to RPR mode (Different software versions)
> Sep 4 13:31:01 gw-87 77: Sep 4 13:27:37: %PFREDUN-SP-6-ACTIVE: Standby
> initializing for RPR mode
> Sep 4 13:31:01 gw-87 78: Sep 4 13:27:38: %HA_CONFIG_SYNC-3-IPC: cannot open
> standby port no such port
> Sep 4 13:31:01 gw-87 79: Sep 4 13:27:38: %HA_CONFIG_SYNC-3-IPC: cannot open
> standby port no such port
> Sep 4 13:31:01 gw-87 80: Sep 4 13:27:38: %HA_CONFIG_SYNC-3-IPC: cannot open
> standby port no such port
> Sep 4 13:31:01 gw-87 81: Sep 4 13:27:38: %HA_CONFIG_SYNC-3-IPC: cannot open
> standby port no such port
> Sep 4 13:31:01 gw-87 82: Sep 4 13:27:38: %IPC-3-APP_IPC_FAIL: Open ipc port
> IPC-Apps:Standby failed. IPC Error: no such port (7)
> Sep 4 13:31:01 gw-87 83: -Traceback= 4044267C 404426C8 40442A5C 405DDBAC
> 405D6850 405D7684
> Sep 4 13:31:01 gw-87 84: Sep 4 13:27:38: %SYS-SP-3-LOGGER_FLUSHED: System
> was paused for 00:00:00 to ensure console debugging output.
> Sep 4 13:31:01 gw-87 85:
> Sep 4 13:31:03 gw-87 86: Sep 4 13:27:39: %FABRIC-SP-5-FABRIC_MODULE_BACKUP:
> The Switch Fabric Module in slot 6 became standby
> Sep 4 13:31:21 gw-87 87: Sep 4 13:27:41: %DIAG-SP-6-RUN_MINIMUM: Module 6:
> Running Minimum Diagnostics...
> Sep 4 13:31:21 gw-87 88: Sep 4 13:27:43: %MLS_RATE-4-DISABLING: The Layer2
> Rate Limiters have been disabled.
> Sep 4 13:31:21 gw-87 89: Sep 4 13:27:42: %DIAG-SP-6-DIAG_OK: Module 6:
> Passed Online Diagnostics
> Sep 4 13:31:21 gw-87 90: Sep 4 13:27:43: %OIR-SP-6-INSCARD: Card inserted in
> slot 6, interfaces are now online
> Sep 4 13:31:21 gw-87 91: Sep 4 13:27:49: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing
> the startup configuration to the standby Router
> Sep 4 13:31:21 gw-87 92: Sep 4 13:27:49: %PFINIT-SP-1-CONFIG_SYNC_FAIL:
> Sync'ing the startup configuration to the standby Router FAILED
> Sep 4 13:31:21 gw-87 93: Sep 4 13:27:49: %PFINIT-SP-1-CONFIG_SYNC_FAIL:
> Sync'ing the private configuration to the standby Router FAILED
> Sep 4 13:31:21 gw-87 94: Sep 4 13:27:49: %PFINIT-SP-1-CONFIG_SYNC_FAIL:
> Sync'ing the startup configuration to the standby Router FAILED
> Sep 4 13:31:21 gw-87 95: Sep 4 13:27:49: %PFINIT-SP-1-CONFIG_SYNC_FAIL:
> Sync'ing the private configuration to the standby Router FAILED
> Sep 4 13:31:21 gw-87 96: Sep 4 13:27:49: %OIR-SP-3-PWRCYCLE: Card in module
> 6, is being power-cycled (RF request)
> Sep 4 13:31:21 gw-87 97: Sep 4 13:27:49: %PFREDUN-SP-4-BOOTSTRING_INVALID:
> The bootfile slavesup-bootflash: is not present in standby
> Sep 4 13:31:22 gw-87 98: Sep 4 13:27:50: %PFREDUN-SP-6-ACTIVE: Standby
> processor removed or reloaded, changing to Simplex mode
> Sep 4 13:31:24 gw-87 99: Sep 4 13:28:01: %BGP-5-ADJCHANGE: neighbor
> 172.16.113.120 <http://172.16.113.120> Up
> Sep 4 13:31:50 gw-87 101: Sep 4 13:28:33: %EARL_L3_ASIC-SP-3-INTR_WARN: EARL
> L3 ASIC: Non-fatal interrupt Packet Parser block interrupt
> Sep 4 13:31:51 gw-87 102: Sep 4 13:28:35: %TAC-4-SERVREF: Warning: Server
> 172.31.10.14:0 <http://172.31.10.14:0> is still referenced by server group.
> Sep 4 13:32:03 gw-87 103: Sep 4 13:28:46: %MLS_STAT-SP-4-IP_LEN_ERR: MAC/IP
> length inconsistencies
> Sep 4 13:32:44 gw-87 105: Sep 4 13:29:27: %PFREDUN-SP-4-PHYSMEM_MISMATCH:
> Asymmetrical redundant configuration: Active SP has (458720/65536K) memory,
> Standby has (458752/65536K).
> Sep 4 13:32:44 gw-87 106: Sep 4 13:29:27: %PFREDUN-SP-4-PHYSMEM_MISMATCH:
> Asymmetrical redundant configuration: Active RP has (458720/65536K) memory,
> Standby has (458752/65536K).
> Sep 4 13:32:44 gw-87 107: Sep 4 13:29:27: %PFREDUN-SP-4-VERSION_MISMATCH:
> Defaulting to RPR mode (Different software versions)
> Sep 4 13:32:44 gw-87 108: Sep 4 13:29:28: %PFREDUN-SP-6-ACTIVE: Standby
> initializing for RPR mode
> Sep 4 13:32:45 gw-87 109: Sep 4 13:29:29: %HA_CONFIG_SYNC-3-IPC: cannot open
> standby port no such port
> Sep 4 13:32:45 gw-87 110: Sep 4 13:29:29: %HA_CONFIG_SYNC-3-IPC: cannot open
> standby port no such port
> Sep 4 13:32:45 gw-87 111: Sep 4 13:29:29: %HA_CONFIG_SYNC-3-IPC: cannot open
> standby port no such port
> Sep 4 13:32:45 gw-87 112: Sep 4 13:29:29: %HA_CONFIG_SYNC-3-IPC: cannot open
> standby port no such port
> Sep 4 13:32:45 gw-87 113: Sep 4 13:29:29: %SYS-SP-3-LOGGER_FLUSHED: System
> was paused for 00:00:00 to ensure console debugging output.
> Sep 4 13:32:45 gw-87 114:
> Sep 4 13:32:45 gw-87 115: Sep 4 13:29:30: %IPC-3-APP_IPC_FAIL: Open ipc port
> IPC-Apps:Standby failed. IPC Error: no such port (7)
> Sep 4 13:32:45 gw-87 116: -Traceback= 4044267C 404426C8 40442A5C 405DDBAC
> 405D6850 405D7684
> Sep 4 13:32:46 gw-87 117: Sep 4 13:29:29: %FABRIC-SP-5-FABRIC_MODULE_BACKUP:
> The Switch Fabric Module in slot 6 became standby
> Sep 4 13:32:47 gw-87 118: Sep 4 13:29:30: %DIAG-SP-6-RUN_MINIMUM: Module 6:
> Running Minimum Diagnostics...
> Sep 4 13:32:48 gw-87 119: Sep 4 13:29:32: %MLS_RATE-4-DISABLING: The Layer2
> Rate Limiters have been disabled.
> Sep 4 13:32:49 gw-87 120: Sep 4 13:29:32: %DIAG-SP-6-DIAG_OK: Module 6:
> Passed Online Diagnostics
> Sep 4 13:32:49 gw-87 121: Sep 4 13:29:33: %OIR-SP-6-INSCARD: Card inserted
> in slot 6, interfaces are now online
> Sep 4 13:33:00 gw-87 123: Sep 4 13:29:41: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing
> the startup configuration to the standby Router
> Sep 4 13:33:33 gw-87 125: Sep 4 13:30:15: %BGP-5-ADJCHANGE: neighbor
> xx.77.0.109 Up
> Sep 4 13:34:59 gw-87 127: Sep 4 13:31:42: %PFINIT-SP-5-CONFIG_SYNC: Sync'ing
> the startup configuration to the standby Router
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>