[c-nsp] OSPF on FastEthernet problem

[Vincent De Keyzer]

Hello,

 

I had an unusual problem on a Cisco 7206VXR (running c7200-p-mz.122-13): all
OSPF adjacencies on .1Q subinterfaces of its Fa0/0 were down.

 

In an attempt to restart OSPF, I moved one subinterface to passive (then
back to active), and this has fixed the problem.

 

However, I would like to understand what went bad - can somebody explain the
logs below?


Vincent

 

 

alfonso#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

alfonso(config)#router ospf 1755

alfonso(config-router)#

alfonso(config-router)#passive-interface FastEthernet0/0.824

Sep  7 11:19:25.854 CET: %DEC21140-5-REMOVE_HWADDR_FAIL: Interface
FastEthernet0/0 failed to remove Addr:=0100.5e00.0005 from HWAF

 

Sep  7 11:19:25.854 CET: %DEC21140-5-REMOVE_HWADDR_FAIL: Interface
FastEthernet0/0 failed to remove Addr:=0100.5e00.0006 from HWAF

 

alfonso(config-router)#no passive-interface FastEthernet0/0.824

Sep  7 11:19:27.570 CET: %OSPF-5-ADJCHG: Process 1755, Nbr x.y.240.132 on
FastEthernet0/0.825 from LOADING to FULL, Loading Done

Sep  7 11:19:28.378 CET: %OSPF-5-ADJCHG: Process 1755, Nbr x.y.240.144 on
FastEthernet0/0.820 from LOADING to FULL, Loading Done

alfonso(config-router)#

Sep  7 11:19:31.930 CET: %OSPF-5-ADJCHG: Process 1755, Nbr x.y.240.132 on
FastEthernet0/0.824 from LOADING to FULL, Loading Done