[c-nsp] OSPF on FastEthernet problem

Ed Ravin eravin at panix.com
Wed Sep 7 11:13:56 EDT 2005


On Wed, Sep 07, 2005 at 11:42:02AM +0200, Vincent De Keyzer wrote:
> I had an unusual problem on a Cisco 7206VXR (running c7200-p-mz.122-13): all
> OSPF adjacencies on .1Q subinterfaces of its Fa0/0 were down.
>
> In an attempt to restart OSPF, I moved one subinterface to passive (then
> back to active), and this has fixed the problem.

I had the same problem (except I didn't see the log messages you had)
on a Cisco 7206 non-VXR with 12.2T(mumble).  It happened a few times,
and the fix was the same as yours - manually setting passive and then
back to active.

I upgraded to 12.4T on that box a month ago, and hope that will fix the
problem.  It happened so infrequently I can't really say if it's fixed.

> alfonso(config-router)#passive-interface FastEthernet0/0.824
> Sep  7 11:19:25.854 CET: %DEC21140-5-REMOVE_HWADDR_FAIL: Interface
> FastEthernet0/0 failed to remove Addr:=0100.5e00.0005 from HWAF
> Sep  7 11:19:25.854 CET: %DEC21140-5-REMOVE_HWADDR_FAIL: Interface
> FastEthernet0/0 failed to remove Addr:=0100.5e00.0006 from HWAF
> 
> alfonso(config-router)#no passive-interface FastEthernet0/0.824
> Sep  7 11:19:27.570 CET: %OSPF-5-ADJCHG: Process 1755, Nbr x.y.240.132 on
> FastEthernet0/0.825 from LOADING to FULL, Loading Done
> Sep  7 11:19:28.378 CET: %OSPF-5-ADJCHG: Process 1755, Nbr x.y.240.144 on
> FastEthernet0/0.820 from LOADING to FULL, Loading Done
> 
> alfonso(config-router)#
> 
> Sep  7 11:19:31.930 CET: %OSPF-5-ADJCHG: Process 1755, Nbr x.y.240.132 on
> FastEthernet0/0.824 from LOADING to FULL, Loading Done


More information about the cisco-nsp mailing list