[c-nsp] Cisco boxes and Syslog-ng

[Earls, Michael]

Your syslog-ng config file should look like this

destination x.x.x.x { file(/var/syslog/location1/router/routername.log);
};
filter f_x.x.x.x { host(x.x.x.x); };
log { source(net); filter(f_x.x.x.x); destination(x.x.x.x); };

This will filter syslog messages on the IP address "x.x.x.x"


-- 
Michael 

PGP Info: KeyID 0x0DFD993C 
Fingerprint F903 0325 5105 2CDB 4BF4 C88B 72F7 BA7A 28CC 598A 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Joost greene
Sent: Wednesday, September 07, 2005 9:25 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco boxes and Syslog-ng

Hello,

I have different sets of devices, dslams, nas, core routers, customer
routers,...

i want to syslog them all, i want to make each device log to a file
separately to ease it up for NOC, someone suggested syslog-ng, frankly,
i got quickly lost in its docs, the syntax isnt clear, how can i just
easily specify to let it log per source into different files ?

Regards,
Joost
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


This e-mail transmission contains information that is confidential and may be privileged.   It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated.