[c-nsp] show hardware email address

[Clinton Work]

I would be careful with the CatOS "show sprom" command. There is bug 
CSCeb18517 where "show sprom <slot>" on a WS-X6101 will stop the module from 
TXing traffic.

CSCeb18517 - Show sprom x freezes a WS-X6101-OC12 Card

WS-X6101-OC12 Field Notice
http://www.cisco.com/warp/public/770/fn24535.shtml#DDTS



Dale.Francis at barclayscapital.com wrote:
>  Hi,
> 
> If you are running IOS you can use the command "sh idprom all". This
> will give you Serial number, HW revision etc. If you are running CatOS
> use the "sh sprom" command
>