[c-nsp] Frame Circuit Not Cooperating

Mark Rogaski wendigo at pobox.com
Thu Sep 15 03:05:17 EDT 2005


An entity claiming to be Ted Mittelstaedt (tedm at toybox.placo.com) wrote:
: 
: If your on a smart jack unless you have hundreds of feet of cable
: off of that jack you should not have to change the LBO from the
: default setting.  If you do, the smart jack is bad.  The default is
: the lowest power setting.  if you have to jack up the power to get
: a smartjack 20 feet away to hear you then the smartjack's receive
: circuits are fried.
: 
: Also, if you are hundreds of feet away on crappy cable and you do
: have to change LBO then the Telco must change it in the smartjack
: on his side.  Just raising the power your sending into the line
: may make him her you better, but if he's at the lower setting
: you won't hear him.
: 

You're right ... I was confusing this with some DS3 scenarios.  But, it's
entirely possible to run into long cables in the field.

Mark

-- 
[]                      |
[] Mark Rogaski         |    Nothing spells caveat emptor like a mannequin
[] wendigo at pobox.com    |    with a severed head.
[] mrogaski at cpan.org    |    -- Brooke McEldowney, _9 Chickweed Lane_
[]                      |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : https://puck.nether.net/pipermail/cisco-nsp/attachments/20050915/859042b6/attachment.bin


More information about the cisco-nsp mailing list