[c-nsp] PA-2FE-TX using both ports kills module

[FreeLSD]

On Sat, Sep 24, 2005 at 07:19:00PM +0200, Gert Doering wrote:
> Hi,
> 
> On Sat, Sep 24, 2005 at 09:05:34PM +0400, FreeLSD wrote:
> > Have two PA-2FE-TX, but in 75xx with VIP4-80 and VIP2-40 (both tested).
> > 12.0.26S, 12.0.28S. If start passing traffic throught second port, 
> > VIP do reload with VIP-3-PCI_BUS0_SYSERROR: PCI bus 0 system error.
> > Both VIP work nice with any other cards.
> 
> What hardware versions (show diag) do you have?
> 
> "This is exactly what we've been seeing!"

arghm.. both cards have same rev

1.
        PA Bay 0 Information:
                Dual Port Fast Ethernet (RJ45), 2 ports, FRU: PA-2FE-TX=
                EEPROM format version 4
                HW rev 1.00, Board revision B0
                Serial number: JAExxxxxxxx  Part number: 73-5419-06

2.
        PA Bay 0 Information:
                Dual Port Fast Ethernet (RJ45), 2 ports, FRU: PA-2FE-TX=
                EEPROM format version 4
                HW rev 1.00, Board revision B0
                Serial number: JAExxxxxxxx  Part number: 73-5419-06

but i found third card with same revision and it works prefect on production router in 75xx VIP4-80 with 12.0(29)S

        PA Bay 1 Information:
                Dual Port Fast Ethernet (RJ45), 2 ports, FRU: PA-2FE-TX=
                EEPROM format version 4
                HW rev 1.00, Board revision B0
                Serial number: MPCxxxxxxxx  Part number: 73-5419-06


  5 minute input rate 10103000 bits/sec, 4586 packets/sec
  5 minute output rate 16096000 bits/sec, 5694 packets/sec

  5 minute input rate 7217000 bits/sec, 2775 packets/sec
  5 minute output rate 4481000 bits/sec, 1798 packets/sec

where 
        PA Bay 0 Information:
                Fast-Ethernet PA, 1 ports, 100BaseTX-ISL, FRU: PA-FE-TX=
                EEPROM format version 1
                HW rev 1.00, Board revision A0
                Serial number: xxxxxxxx  Part number: 73-1688-04

  5 minute input rate 21397000 bits/sec, 10454 packets/sec
  5 minute output rate 20128000 bits/sec, 10522 packets/sec



already tryed my "broken" cards in bay 1 with empty bay 0 (12.0(29)S), but 
with no success. i think need to find one PA-FE-TX=

ps. MPC vs JAE serial numbers. :(