[c-nsp] PA-2FE-TX using both ports kills module

[Gert Doering]

Hi,

On Sat, Sep 24, 2005 at 09:06:56PM +0200, Gert Doering wrote:
> The other "known bad" card we have is currently not in use, so I can't
> check the serial number before monday.

Here we go...

Slot 5:
	Dual Port FastEthernet (RJ45) Port adapter, 2 ports
	Port adapter is analyzed 
	Port adapter insertion time 00:03:13 ago
	EEPROM contents at hardware discovery:
	Hardware Revision        : 1.0
	PCB Serial Number        : JAE064006X5
	Part Number              : 73-5419-06
	Board Revision           : B0
	RMA Test History         : 00
	RMA Number               : 0-0-0-0
	RMA History              : 00
	Deviation Number         : 0-0
	Product Number           : PA-2FE-TX           
	Top Assy. Part Number    : 800-08350-06

(1.0/B0/JAE* -> fits the pattern)

And yes, it *does* crash.

Here's what I did:

 - configure faste 5/1 to 10.44.44.44/24
 - hook up a PC with null modem cable (100 Mbit, full duplex)
 - ping "sweep range of sizes" the PC
 - ping runs for a while, with no evident problems

 - hookup up faste 5/0 to our office LAN
 - set port to "no shutdown"
 - fiddle with "ip address dhcp" (which doesn't work in 12.2S)
 - no actual IP was assigned yet, but packets have been coming in 
   nevertheless (normal office environment with v4+v6)
 - boom:


!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
%ERR-1-SERR: PCI bus system/parity error
%ERR-1-FATAL: Fatal error interrupt, No reloading
 err_stat=0x80, err_enable=0xFF, mgmt_event=0x40

Bridge 0, for PA Bay 0 (I/O Card, PCMCIA, Interfaces), Handle=0
DEC21150 bridge chip, config=0x0
(0x00):dev, vendor id       = 0x00231011
(0x04):status, command      = 0x02B00147
(0x08):class code, revid    = 0x06040006
(0x0C):hdr, lat timer, cls  = 0x00012E10
...
Queued messages:
*Sep 26 11:28:36.423: %SYS-3-INTPRINT: Illegal printing attempt from interrupt level.
-Process= "<interrupt level>", ipl= 5, pid= 3
-Traceback= 606C371C 606C5D80 607B97EC 607B9878 607990A4 607992F8 607564AC

Unexpected exception, CPU signal 22, PC = 0x0
...
Free space check for bootflash:crashinfo_20050926-112844 failed (312/27534)

No cache error exceptions since boot

Nested r4k_return_to_monitor call (2 times)


Unexpected exception, CPU signal 0, PC = 0x0


-Traceback= 0 0
$0 : 00000000, AT : 00000000, v0 : 00000000, v1 : 00000000
a0 : 00000000, a1 : 00000000, a2 : 00000000, a3 : 00000000
t0 : 00000000, t1 : 00000000, t2 : 00000000, t3 : 00000000
t4 : 00000000, t5 : 00000000, t6 : 00000000, t7 : 00000000
s0 : 00000000, s1 : 00000000, s2 : 00000000, s3 : 00000000
s4 : 00000000, s5 : 00000000, s6 : 00000000, s7 : 00000000
t8 : 00000000, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 00000000, sp : 00000000, s8 : 00000000, ra : 00000000
EPC  : 00000000, ErrorEPC : 00000000, SREG     : 00000000
MDLO : 00000000, MDHI     : 00000000, BadVaddr : 00000000
Cause 00000000 (Code 0x0): Interrupt exception

No warm reboot Storage 
*** System received an Error Interrupt ***
signal= 0x16, code= 0x0, context= 0x62420590
PC = 0x60758234, Cause = 0x2420, Status Reg = 0x34008002


I've put up the full crashinfo file (got it crash a 2nd time) on 
http://www.space.net/~gert/pa-2fe-crashinfo_20050926-113840


Gert Doering
        -- NetMaster
-- 
Total number of prefixes smaller than registry allocations:  71007  (66629)

SpaceNet AG                    Mail: netmaster at Space.Net
Joseph-Dollinger-Bogen 14      Tel : +49-89-32356-0
D- 80807 Muenchen              Fax : +49-89-32356-234