[c-nsp] PA-2FE-TX using both ports kills module

[FreeLSD]

On Sat, Sep 24, 2005 at 09:06:56PM +0200, Gert Doering wrote:
> On Sat, Sep 24, 2005 at 10:10:59PM +0400, FreeLSD wrote:
> [.. two bad cards: ]
> >                 HW rev 1.00, Board revision B0
> >                 Serial number: JAExxxxxxxx  Part number: 73-5419-06
> >                 HW rev 1.00, Board revision B0
> >                 Serial number: JAExxxxxxxx  Part number: 73-5419-06
> [ good card: ]
> >                 HW rev 1.00, Board revision B0
> >                 Serial number: MPCxxxxxxxx  Part number: 73-5419-06
> 
> Ah.  Narrowing things down.
> 
> > ps. MPC vs JAE serial numbers. :(
> 
> This could be significant.

btw, another PA-2FE-TX in 7206VXR seems good:
        Hardware Revision        : 1.0
        PCB Serial Number        : MICxxxxxxxx
        Part Number              : 73-5419-06
        Board Revision           : B0

because port 1 have (port 0 currently not used)
  30 second input rate 6914000 bits/sec, 2654 packets/sec
  30 second output rate 9925000 bits/sec, 2802 packets/sec


> My "known bad" card is:
> 
>                 HW rev 1.00, Board revision B0
>                 Serial number: JAE064006VR  Part number: 73-5419-06 
 
> The other "known bad" card we have is currently not in use, so I can't
> check the serial number before monday.

drop me letter with serial.