[c-nsp] PA-2FE-TX using both ports kills module

[Chris Cappuccio]

Gert Doering [gert at greenie.muc.de] wrote:
> Hi,
> 
> On Sat, Sep 24, 2005 at 10:10:59PM +0400, FreeLSD wrote:
> [.. two bad cards: ]
> >                 HW rev 1.00, Board revision B0
> >                 Serial number: JAExxxxxxxx  Part number: 73-5419-06
> >                 HW rev 1.00, Board revision B0
> >                 Serial number: JAExxxxxxxx  Part number: 73-5419-06
> [ good card: ]
> >                 HW rev 1.00, Board revision B0
> >                 Serial number: MPCxxxxxxxx  Part number: 73-5419-06
> 
> Ah.  Narrowing things down.
> 
> > ps. MPC vs JAE serial numbers. :(
> 
> This could be significant.
> 
> My "known bad" card is:
> 
>                 HW rev 1.00, Board revision B0
>                 Serial number: JAE064006VR  Part number: 73-5419-06 
> 
> also a JAE* serial number.
> 
> The other "known bad" card we have is currently not in use, so I can't
> check the serial number before monday.
> 

I have TWO bad cards that are as follows:

        PA Bay 0 Information:
                Dual Port Fast Ethernet (RJ45), 2 ports, FRU: PA-2FE-TX=
                EEPROM format version 4
                HW rev 1.00, Board revision C0
                Serial number: JAE064006UK  Part number: 73-5419-06 

and

        PA Bay 0 Information:
                Dual Port Fast Ethernet (RJ45), 2 ports, FRU: PA-2FE-TX=
                EEPROM format version 4
                HW rev 1.00, Board revision B0
                Serial number: JAE064006MW  Part number: 73-5419-06 

-- 
"Attacks always get better; they never get worse."
  -- "Old NSA saying"