[c-nsp] Voice Tranlsation Rules

[Gben]

Maybe this will help you

voice translation-rule 2
 rule 1 // /00/ type any national
!
voice translation-profile national_calls
 translate called 2
!
dial-peer voice 80 pots
 description *** To PSTN ***
 translation-profile outgoing national_calls
 application session
 destination-pattern .T
 progress_ind alert enable 8
 direct-inward-dial
 port 7/3:D


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of info at beprojects.com
Sent: Wednesday, September 28, 2005 5:12 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Voice Tranlsation Rules

Does anybody have any experience with voice translation rules?  I am 
having an issue with a CLEC and they said that we are sending the wrong 
"plan" and "type".  We need to set it to isdn and national.  I found the 
following link and it looks like I can use it to change the call types, 
but I can't figure out the exact syntax for what I need to do.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a00803
25e8e.shtml

I need to match all numbers and change it to isdn and national, but I 
don't want/need to change the dialed number.  Every example changes the 
number.  I see that a /.*/ will match any number, but I can't figure out 
the syntax to avoid changing the number itself.  Any ideas?





_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.