[c-nsp] PA-2FE-TX using both ports kills module

[Rodney Dunn]

All of my cards in the lab are a different rev.

Anyone willing to send me one that has failed?

If so, email me offline.

Rodney

 
On Mon, Sep 26, 2005 at 10:19:55PM +0400, FreeLSD wrote:
> On Mon, Sep 26, 2005 at 08:34:49AM +0200, Gert Doering wrote:
> > On Mon, Sep 26, 2005 at 10:22:28AM +1200, Nikolai Schupbach wrote:
> > > >Does it work if you run port 1 as "single port"?  Or only "port 0"?
> > > It works fine if I use either port, as long as I don't use both ports 
> > > simultaneously.
> > 
> > Interesting.  This is not exactly the same problem we've been observing,
> > but then, I've only done limited testing in the 7200s - mainly 7500/VIP2.
> 
> 
> I've done testing JAE* cards behaviour for 7206VXR (2 NPE-400) and 
> 7500 (VIP4-80, VIP2-40) 
> 
> -- in 7200 card do fail if you run both port simultaneously.
> -- in 7500 card work right for port 0 and do fail with port 1.
> 
> so we talk about the same cards :)
> 
> 
> summary of "broken" cards
> 
> fingerprint:
>   PA-2FE-TX 
>   HW rev 1.00 
>   Board revision B0
>   Serial number: JAExxxxxxxx 
> 
> 5 cards tested by 3 people (2 - /me, 2 - Gert, 1 - Nikolai)
> in 7 (or more) different 7500/7200 routers 
> with different version IOS (12.0*S, 12.2*S)
> 
> any vote from cisco? ;)
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/