[c-nsp] bridge FIB-Type in CatOS mls entry

[Edwin Lok]

>> CatOS ver: 7.6(12) with PFC2 and MSFC2
>> 
>> Switch> (enable) sh mls entry cef ip x.x.x.0/18
>> Mod FIB-Type  Destination-IP  Destination-Mask NextHop-IP      Weight
>> --- --------- --------------- ---------------- --------------- ------
>>   15 bridge    x.x.x.0   255.255.192.0
>> 
> What is the configuration of the interface where this prefix is reached?

interface Vlan50
  description Vlan50
  ip address a.a.a.a 255.255.255.128
  no ip redirects
  no ip unreachables
  ip route-cache flow
  ip ospf message-digest-key 1 md5 7 XXXXXXXXXXXX
  ip ospf cost 100
  ip ospf priority 10
  mls rp vtp-domain DOMAIN_NAME
  mls rp management-interface
  mls rp ip

CEF entry in the MSFC seems OK..

MSFC#sh ip cef x.x.x.0 255.255.192.0
x.x.x.0/18, version 182408, epoch 0, per-destination sharing
0 packets, 0 bytes
   via y.y.y.y, 0 dependencies, recursive
     next hop a.a.a.d, Vlan50 via y.y.y.y/32
     valid adjacency
   Recursive load sharing using y.y.y.y/32.

Need any other information?

Rgds
Edwin