[c-nsp] Problem with catalyst 2950

Dmitry Derevyagin edwin at alkar.net
Mon Apr 10 09:55:26 EDT 2006


On Mon, 10 Apr 2006 08:37:40 -0500
Tom Sands <tsands at rackspace.com> wrote:

> It looks like the physical port itself is going down (fa0/5).

Yes.
fa0/5 Port go to down.

>  The rest 
> of the messages seem normal assuming you have RSPAN setup.

SPAN is not configure on this switch

sw-main2#sh monitor session all
 No SPAN configuration is present in the system.

Therefore I also have paid attention to the given messages.

> > Good day.
> > About once a day(time problem is not static) there is a problem:
> > Apr 10 04:26:06: cpd_rspan_pm_vp_statechange: cookieCount 7
> > Apr 10 04:26:06: cpd_rspan_pm_vp_statechange: Removed is 1 given port(Fa0/5), vlanId 11
> > Apr 10 04:26:06: cpd_rspan_pm_vp_statechange: Removed is 1 given port(Fa0/5), vlanId 13
> > Apr 10 04:26:06: cpd_rspan_pm_vp_statechange: Removed is 1 given port(Fa0/5), vlanId 100
> > Apr 10 04:26:06: cpd_rspan_pm_vp_statechange: Removed is 1 given port(Fa0/5), vlanId 101
> > Apr 10 04:26:06: cpd_rspan_pm_vp_statechange: Removed is 1 given port(Fa0/5), vlanId 102
> > Apr 10 04:26:06: cpd_rspan_pm_vp_statechange: Removed is 1 given port(Fa0/5), vlanId 175
> > Apr 10 04:26:06: cpd_rspan_pm_vp_statechange: Removed is 1 given port(Fa0/5), vlanId 188
> > Apr 10 04:26:06: cpd_port_set_all_vlans: Called for Fa0/5
> > Apr 10 04:26:06: ++sw-vlan MODECHANGE: PORT Fa0/5, cookie 0x80CDE824 mode change to none
> > Apr 10 04:26:06: calhoun_span_port_linkchange:port linkchange event invoked(DOWN)
> > Apr 10 04:26:06: calhoun_span_port_linkchange:port linkchange event invoked(UP)
> > Apr 10 04:26:07: ++sw-vlan MODECHANGE: PORT Fa0/5, cookie 0x80CDE824 mode change to trunk
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/5
> > Apr 10 04:26:07: cpd_rspan_pm_vp_statechange: cookieCount 7
> > Apr 10 04:26:07: cpd_rspan_pm_vp_statechange: Removed is 0 given port(Fa0/5), vlanId 11
> > Apr 10 04:26:07: cpd_rspan_pm_vp_statechange: Removed is 0 given port(Fa0/5), vlanId 13
> > Apr 10 04:26:07: cpd_rspan_pm_vp_statechange: Removed is 0 given port(Fa0/5), vlanId 100
> > Apr 10 04:26:07: cpd_rspan_pm_vp_statechange: Removed is 0 given port(Fa0/5), vlanId 101
> > Apr 10 04:26:07: cpd_rspan_pm_vp_statechange: Removed is 0 given port(Fa0/5), vlanId 102
> > Apr 10 04:26:07: cpd_rspan_pm_vp_statechange: Removed is 0 given port(Fa0/5), vlanId 175
> > Apr 10 04:26:07: cpd_rspan_pm_vp_statechange: Removed is 0 given port(Fa0/5), vlanId 188
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/5
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/6
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/7
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/12
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/15
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/17
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/2
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/3
> > Apr 10 04:26:07: cpd_port_set_all_vlans: Called for Fa0/4
> > Apr 10 04:26:22: cpd_port_set_all_vlans: Called for Fa0/5
> > Apr 10 04:26:22: cpd_port_set_all_vlans: Called for Fa0/5
> > Apr 10 04:26:22: cpd_port_set_all_vlans: Called for Fa0/5
> > Apr 10 04:26:37: cpd_port_set_all_vlans: Called for Fa0/5
> > Apr 10 04:26:37: cpd_port_set_all_vlans: Called for Fa0/5
> > 
> > 
> > sw-main2#sh run int fa0/5
> > Building configuration...
> > 
> > Current configuration : 289 bytes
> > !
> > interface FastEthernet0/5
> >  description R1
> >  switchport trunk allowed vlan 11,13,100-102,175,188
> >  switchport mode trunk
> >  switchport nonegotiate
> >  load-interval 30
> >  speed 100
> >  duplex full
> >  storm-control broadcast level 10.00
> >  spanning-tree portfast
> >  spanning-tree bpdufilter enable
> > end
> > 
> > 
> > sw-main2#sh ver
> > Cisco Internetwork Operating System Software
> > IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA3, RELEASE SOFTWARE (fc1)
> > Copyright (c) 1986-2005 by cisco Systems, Inc.
> > Compiled Tue 25-Jan-05 18:19 by antonino
> > Image text-base: 0x80010000, data-base: 0x80560000
> > 
> > ROM: Bootstrap program is C2950 boot loader
> > 
> > cs99-01-od uptime is 1 year, 1 week, 6 days, 8 hours, 53 minutes
> > System returned to ROM by power-on
> > System restarted at 06:58:37 EEST Mon Mar 28 2005
> > System image file is "flash:/c2950-i6q4l2-mz.121-22.EA3.bin"
> > 
> > cisco WS-C2950-24 (RC32300) processor (revision K0) with 21046K bytes of memory.
> > Processor board ID FOC0738Y3SG
> > Last reset from system-reset
> > Running Standard Image
> > 24 FastEthernet/IEEE 802.3 interface(s)
> > 
> > 32K bytes of flash-simulated non-volatile configuration memory.
> > Base ethernet MAC Address: 00:0D:ED:28:61:C0
> > Motherboard assembly number: 73-5781-12
> > Power supply part number: 34-0965-01
> > Motherboard serial number: FOC073827FK
> > Power supply serial number: PHI073008WD
> > Model revision number: K0
> > Motherboard revision number: A0
> > Model number: WS-C2950-24
> > System serial number: FOC0738Y3SG
> > Configuration register is 0xF
> > 
> > At whom what ideas on the given problem?
> > 
> > P.S.
> > In advance many thanks for any advice


-- 
_________________________________________________________
Dmitry Derevyagin
Telecommunication Company Optima Telecom 
tel/fax: +38(0562)34-00-44



More information about the cisco-nsp mailing list