[c-nsp] Double authentication on terminal server

[Vincent De Keyzer]

Thanks Steve, that did it!

Vincent

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Steve Amato
> Sent: lundi 10 avril 2006 16:51
> To: Vincent De Keyzer
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Double authentication on terminal server
> 
> I believe you'll went to set a aaa authentication group with no
> authentication:
> 
>         aaa authentication login line_auth none
> 
> Then add this authentication under the line settings:
> 
>         line 33 64
>            login authentication line_auth
> 
> I think that should do the trick.
> 
> -Steve Amato
> 
> 
> 
> Vincent De Keyzer wrote:
> > Hello,
> >
> >
> >
> > when I am on a terminal server (3620 with NM-16A), and I do a telnet to
> port
> > (2000+port number), a double authentication happens: as I understand it,
> I
> > first have to authenticate to get *out* of the TS, and then I am on the
> > console cable and I can authenticate into the target device.
> >
> >
> >
> > This behaviour started when we activated TACACS on the TS.
> >
> >
> >
> > Is there any way to skip the first authentication, which is IMHO quite
> > useless?
> >
> >
> >
> > Vincent
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >
> >
> 
> --
> Stephen A. Amato
> Sr. Network Planning Engineer
> Frontier Communications
> 585-214-1770
> samato at frontiernet.net
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/