[c-nsp] Double authentication on terminal server

[Steve Amato]

I believe you'll went to set a aaa authentication group with no 
authentication:

        aaa authentication login line_auth none

Then add this authentication under the line settings:

        line 33 64
           login authentication line_auth

I think that should do the trick.

-Steve Amato



Vincent De Keyzer wrote:
> Hello,
>
>  
>
> when I am on a terminal server (3620 with NM-16A), and I do a telnet to port
> (2000+port number), a double authentication happens: as I understand it, I
> first have to authenticate to get *out* of the TS, and then I am on the
> console cable and I can authenticate into the target device.
>
>  
>
> This behaviour started when we activated TACACS on the TS.
>
>  
>
> Is there any way to skip the first authentication, which is IMHO quite
> useless?
>
>  
>
> Vincent
>
>  
>
>  
>
>  
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>   

-- 
Stephen A. Amato
Sr. Network Planning Engineer
Frontier Communications
585-214-1770
samato at frontiernet.net