[c-nsp] dot1q subinterfaces on cisco 1721 with MPC860P part# 0

[Ed Ravin]

On Fri, Mar 10, 2006 at 01:56:41PM -0500, Ed Ravin wrote:
> I just ran into a Cisco 1721 that wouldn't accept VLAN commands -
> as described below in an October 2004 post, it appears to be hardware
> trouble.  The messages in the archives didn't indicate what the final
> resolution was - does the hardware have to be exchanged with Cisco
> before VLANs will work?

The short answer is, yes.  I called Cisco and even though I did not
have SmartNet coverage for the router, they approved an RMA.  For those
of you who one day discover you have the same problem, they gave "FN62016" 
field notice 62016?) as the reason for the return.