[c-nsp] Layer 2 failover

[Kevin Graham]

On 4/18/06, andrew2 at one.net <andrew2 at one.net> wrote:

> 1.  Configure the port connected to the Aironet bridge as the failover
> port for the GBIC trunk.  I seem to recall there is a way to do this,
> but I can't seem to find any documentation on it.

FlexLinks --

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swflink.htm

> 2.  Some way to do this using STP?

Probably preferable, as STP will better reflect the forwarding state
of the interface.