[c-nsp] Radius Rate Limit attribute

[Tassos Chatzithomaoglou]

Maybe SSG can help you do that. But it think it's too overkill if you want to 
use it just for that.

Manaf Oqlah wrote on 19/4/2006 12:59:

> "You want to override the rate limit information sent by the Radius server" 
> This is exactly what I want. But at the same time I want to receive the
> rate-limit from radius for each user at the day time, and from router at
> night for all users!
> 
> -----Original Message-----
> From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
> Sent: Wednesday, April 19, 2006 10:37 AM
> To: Manaf Oqlah; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] Radius Rate Limit attribute
> 
> Manaf Oqlah <> wrote on Wednesday, April 19, 2006 10:55 AM:
> 
> 
>>Is there a possible way to change radius rate limit attribute from
>>router? Rate limit for each user received on the router from radius
>>and we want to assign it form the router.
> 
> 
> Not sure I understand. You want to override the rate limit information
> sent by the Radius server? How is it being sent, i.e. how does the
> Radius profile look like?
> Or do you want to stop assigning it from Radius and configure it
> locally? You can configure it on the vtemplate interface, but then it
> applies to all the users. There is no easy way to do per-user settings
> locally on the router..
> 
> 	oli
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

-- 
***************************************
         Tassos Chatzithomaoglou
Network Design & Development Department
              FORTHnet S.A.
          <achatz at forthnet.gr>
***************************************