[c-nsp] Enterprise IOS 12.2 default MPLS label protocol

[Oliver Boehmer (oboehmer)]

Eric Kagan <mailto:ekagan at axsne.com> wrote on Friday, April 21, 2006
5:08 PM:

> Thanks Oli,
> 
>> 12.2 mainline doesn't know about LDP, it only runs TDP. So
> 
> What about 12.3 mainline ?

LDP went into 12.2(2)T (among other trains) and is therefore available
in 12.3 mainline as well.

>> configure your neighboring router to do tdp on the connecting
>> interface (fa0/0), and you're all set.
>> You can select the protocol on a per-interface basis (you can
>> even run both on broadcast interfaces), so running TDP
>> against this 12.2M neighbor and LDP with all others works just fine.
> 
> Would suggest this over running 12.2S ?

why 12.2S? a recommendation depends on many factors, so can't help you.
But in general there is nothing wrong speaking TDP to some and LDP to
other neighbors. There are certain things which won't work with TDP
(targeted sessions, AToM), but if you don't need this on these boxes, go
ahead..

	oli