[c-nsp] BCP for MLPPP

[Mark Kent]

It's been some years since I've modified my MLPPP configs
and I'm wondering if things have changed in "newer" IOS.

On a 7206/NPE-300, 12.0(27)S4, this is the generic multilink
interface:

interface Multilink5
 description foo
 ip address x.y.z.w 255.255.255.252
 ip verify unicast source reachable-via rx
 ppp multilink
 multilink-group 5

and this is one of the T1 interfaces:

interface Serial5/1/7:1
 description foo
 no ip address
 no ip directed-broadcast
 encapsulation ppp
 no ip route-cache cef
 load-interval 30
 no keepalive
 no fair-queue
 down-when-looped
 ppp multilink
 multilink-group 5


Is this still the way to do it?
I can't remember why I have "no keepalive".
The far side is cisco on all my mlppp interfaces.

Thanks,
-mark