[c-nsp] Any gotcha's using this setup to terminate a bunch of T-1's

[Bruce Robertson]

Should work fine, but unless you have the hardware on-hand,  instead of 
the 4x PA-MC-8T1, I'd use a PA-MC-2T3 talking to an M13 mux, or better 
yet have the telco deliver the T1s over a DS3.  You can get an Adtran 
MX2800 pretty cheap on eBay these days, though the PA-MC-2T3 will be 
pretty expensive still.

--
Bruce Robertson, President/CEO                           +1-775-348-7299
Great Basin Internet Services, Inc.    company-wide fax: +1-775-348-9412
http://www.greatbasin.net                       my efax: +1-775-201-1553

Peter Kranz wrote:
> Anyone see any issues with the following config for a cheap way to terminate
> a bunch of T-1's?
> 
> 7206 chassis w/ Single AC
> NPE-200
> C7200-I/O-FE
> 4 PA-MC-8T1 Cards
> 
> Peter Kranz
> Founder/CEO - Unwired Ltd
> www.UnwiredLtd.com
> Desk: 510-868-1614 x100
> Mobile: 510-207-0000
> Fax: 510-217-6031
> pkranz at unwiredltd.com 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> 
> 
> 
>