[c-nsp] Per ATM VP mrtg stats

[Charles J. Boening]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


I've done this before when using "static" p-t-mp VP termination.  Each
VP then showed as it's own interface in the interface MIB.

Trying to save some time, I then switched to dynamic termination when we
upgraded to the 7200VXR platform.  I don't have to create the VP and all
the VC's whenever we expand a DSLAM.  Since I did that though, I haven't
found a way to do per VP traffic monitoring.

Basically, if you're defining the VP in the router, then it should show
up as an interface in the interface MIB.  If you're letting everything
be created dynamically, then your milage may vary.

I'll also give a plug to cacti (http://www.cacti.net/) for monitoring.
Makes it really easy to setup if you have a lot of interfaces on a
device that you want to monitor.


Good luck,
Charlie



> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Robert Hass
> Sent: Tuesday, August 01, 2006 1:34 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Per ATM VP mrtg stats
> 
> Hello
> Is any OID/MIB prividing me ability to create MRTG statistics 
> for each VP traffic at ATM OC3 interface ? On this OC3 i'm 
> terminating ADSL subscribers, each DSLAM have own VP - we 
> just want to have traffic statistics per VP. Is it possible ?
> 
> Thanks,
> Robert
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (MingW32)

iD8DBQFEz25ScGGHuFdGSWARAuDvAJwI3dQ8pLY9Pon7+C30aZmmmaoFfACeKFnv
o+byAmtlHDencD/NgsZa3Mg=
=ahBd
-----END PGP SIGNATURE-----