[c-nsp] PA-GE in non-vxr ?

[Eric Kagan]

I see the docs state for VXR only, but is anyone successfully running one in
a non-VXR ?  I plugged one in to an non-VXR, npe 200 with 12.2 IOS and the
card is recognized via show diag and show ver.  I have a short term need to
get something installed and I won't have a VXR available for a few weeks.  I
will only pass a few mb of traffic and run MPLS.  If anyone is successfully
doing this I would appreciate knowing and if you have any issues.  I will
most likely try anyway, so if you have interest, let me know and I can let
you know what happens - on-list of off.
 
Thanks
Eric