[c-nsp] PA-GE in non-vxr ?

Chris Cappuccio chris at nmedia.net
Fri Aug 11 20:32:27 EDT 2006


You plugged it in, it's recognized, and you're asking us if it will pass
traffic?  Why not just try it out.

Eric Kagan [ekagan at axsne.com] wrote:
> I see the docs state for VXR only, but is anyone successfully running one in
> a non-VXR ?  I plugged one in to an non-VXR, npe 200 with 12.2 IOS and the
> card is recognized via show diag and show ver.  I have a short term need to
> get something installed and I won't have a VXR available for a few weeks.  I
> will only pass a few mb of traffic and run MPLS.  If anyone is successfully
> doing this I would appreciate knowing and if you have any issues.  I will
> most likely try anyway, so if you have interest, let me know and I can let
> you know what happens - on-list of off.
>  
> Thanks
> Eric
>  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Theatre is life
Film is art
Television is furniture


More information about the cisco-nsp mailing list