[c-nsp] PA-GE in non-vxr ?

[Eric Kagan]

> From: Chris Cappuccio [mailto:chris at nmedia.net] 
> 
> You plugged it in, it's recognized, and you're asking us if 
> it will pass traffic?  Why not just try it out.

I really want to know if there are any "issues".  I am not confident a local
router to switch "ping" will be a good indication of it surviving in
production.

Anyone actually doing this that can provide constuctive comments ?

Eric

> 
> Eric Kagan [ekagan at axsne.com] wrote:
> > I see the docs state for VXR only, but is anyone 
> successfully running 
> > one in a non-VXR ?  I plugged one in to an non-VXR, npe 200 
> with 12.2 
> > IOS and the card is recognized via show diag and show ver.  
> I have a 
> > short term need to get something installed and I won't have a VXR 
> > available for a few weeks.  I will only pass a few mb of 
> traffic and 
> > run MPLS.  If anyone is successfully doing this I would appreciate 
> > knowing and if you have any issues.  I will most likely try 
> anyway, so 
> > if you have interest, let me know and I can let you know 
> what happens 
> > - on-list of off.
> >  
> > Thanks
> > Eric
> >  
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> -- 
> Theatre is life
> Film is art
> Television is furniture
>