[c-nsp] 7206 Config Help - DSL Aggregration

[Paul Stewart]

Thanks... Do you have any more information on "However, on later
versions of IOS if you were using PPPoE I think you can setup subscriber
profiles and services to do just that." ? :)

The end users are running PPPOE to this box...

Paul
 

-----Original Message-----
From: Robert Blayzor [mailto:rblayzor at inoc.net] 
Sent: Thursday, August 17, 2006 12:39 PM
To: Paul Stewart
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7206 Config Help - DSL Aggregration

Paul Stewart wrote:
> Hi everyone...
> 
> We have a Cisco 7206VXR that we are doing DSL aggregation on
currently.
> Thanks to some help from a buddy of mine, I believe we have found a 
> way to use different radius servers dependant on their domain name at 
> login time.
> 
> Below is current config.  What I'd like to do is to have domain 
> abc.net added and use another radius server (that shouldn't be hard - 
> but the two listed below point to same radius server today)... My 
> biggest challenge is trying to define separate IP pools for each 
> domain name at login...
> 
> Any ideas?  The l2tp provider has talked about using a series of 
> loopback addresses on our side and have each domain point to a 
> different loopback....


If they are all coming on the same PVC and bound to the same
Virtual-Template, I don't think you can direct RADIUS requests to
another set of servers.  If they come on a separate PVC you can bind
them to another Virtual-Template to which uses another AAA group and
another set of RADIUS servers.  I don't think the router itself will
look at the RADIUS username attribute and direct it to another set of
RADIUS servers, that's what proxy RADIUS is for.

However, on later versions of IOS if you were using PPPoE I think you
can setup subscriber profiles and services to do just that.