[c-nsp] CRC on POS interfaces, 7500

[Kristofer Sigurdsson]

Hello list,

I'm interconnecting an old 7507, RSP8, VIP4-80, PA-POS, with a provider's
Juniper router.

This should be fine, except that the Juniper is set to CRC 16, while the
Cisco defaults to 32.
Usually (on the 7600's) I just do a "crc 16", but that doesn't seem to be an
option on the 7500.
Am I missing something here?  IOS 12.0(24)S6.

Thanks,
Kristo