[c-nsp] Cisco QoS on ATM subinterfaces

[Oliver Boehmer (oboehmer)]

Chris Cappuccio <> wrote on Thursday, August 17, 2006 8:02 PM:

> I'm playing with priority queueing for voice packets on cisco 827
> adsl and PA-A3 cards downstream to adsl circuits.  In every case,
> trying to apply a priority group to an atm interface or subinterface
> results in errors. It seems that Cisco expects you do to ubr or cbr
> or abr on separate PVCs and that's it.  For those trying to do voice
> and internet over the same IP pvc, is there any hope?

are you trying to use the legacy "priority-group" command? Please use
MQC instead, some info is at
http://www.cisco.com/en/US/tech/tk39/tk824/technologies_tech_note09186a0
0800d76b5.shtml. 

	oli