[c-nsp] Device Not ready on Slot0 and disk0

[Richard A Steenbergen]

On Mon, Aug 21, 2006 at 07:27:48PM -0300, Everton Diniz wrote:
> Hi guys,
> 
> I have the following error When i try to copy a new image to the disk
> 
> copy tftp: disk0 Loading c7200-pk9u2-mz.124-8a.bin from xx.xx.xx.xx (via
> FastEthernet0/0): !
> %Error opening slot0:disk0 (Device not ready)
> 
> copy tf slot0
> Loading c7200-pk9u2-mz.124-8a.bin from xx.xx.xx.xx(via FastEthernet0/0): !
> %Error opening slot0:slot0 (Device not ready)
> 
> I cannot access the slot.
> sh slot0
> Open device slot0 failed (Device not ready)

Note your the lack of a colon after "disk0". The box is trying to write to 
slot0: (the default) using a filename "disk0", instead of "disk0:" the 
device.

Use "copy tftp: disk0:" etc etc.

-- 
Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)