[c-nsp] BGP split config

[omar parihuana]

Hi,

Cisco suggest the new format AFI (Address Family Identifier)
introduced with Multiprotocol BGP -MBGP. Instead of "old" NLRI format.

See:

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080443d72.html#wp1095494

Rgds.

On 8/24/06, Vincent De Keyzer <vincent at dekeyzer.net> wrote:
> Hello list,
>
>
>
> I have seen that my BGP config is split in two now, one "standard" part and
> one that starts with "address-family ipv4".
>
>
>
> I remember seeing a few mails about this recently, but I couldn't find back.
>
>
>
> Can somebody point me to an URL, or tell me how to fix this problem? As far
> as I recall, one should move to the new syntax (with "address-family") and
> there is a magic command to do this.
>
>
>
> Vincent
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


-- 
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!