[c-nsp] Disable ARP

[Alex A. Pavlenko]

----- Original Message ----- 
From: "Arnold Nipper" <arnold at nipper.de>
To: "Alex A. Pavlenko" <lex at sandy.ru>
Cc: <cisco-nsp at puck.nether.net>
Sent: Thursday, August 24, 2006 7:12 PM
Subject: Re: [c-nsp] Disable ARP


> On 24.08.2006 17:02 Alex A. Pavlenko wrote
> 
>> Hi!
>> 
>> Are there any means to disable ARP learning on Ethernet interface or subinterface
>> on Cisco router?
>> 
> 
> gw001(config-if)#inter FastEthernet0/1
> gw001(config-if)#no arp ?
>   arpa         Standard arp protocol
>   authorized   Only allow internal authorized ARP entry
>   frame-relay  Enable ARP for a frame relay interface
>   probe        Set ARP probe parameters
>   snap         IEEE 802.3 style arp
>   timeout      Set ARP cache timeout
> 
> doesn't work for you?
> 
Thanks Arnold! It is clear now with Ethernet interface. But subinterface does not support
no arp command. It seems there is no way to  shut down ARP on subinterface :( 

Alex.
> 
> 
> 
> 
> Arnold