[c-nsp] 1841 suitable for BGP?

[Arnold Nipper]

On 29.08.2006 01:01 Tony Varriale wrote

>>From a memory standpoint you will be fine.
> 
> But, you may want to check your CPU utilization...ave and peak.  5 full 
> tables would crush a 1841's cpu...even 1 would give it a run for it's peak 
> money.  Then add in 20mbps of throughput?  Possibly add in any bells and 
> whistles?  Assuming we are talking about Cisco's 1841...there is no way.
> 

gw001#cpu
CPU utilization for five seconds: 3%/0%; one minute: 7%; five minutes: 6%

I have to admit that this box is not doing much traffic. Only up to 
10Mbps in total ...

-- 
Arnold Nipper, AN45