[c-nsp] 1841 suitable for BGP?

[Tony Varriale]

sh proc cpu hist?

----- Original Message ----- 
From: "Arnold Nipper" <arnold at nipper.de>
To: "Tony Varriale" <tvarriale at comcast.net>
Cc: <peter at whole-uk.com>; <cisco-nsp at puck.nether.net>
Sent: Tuesday, August 29, 2006 10:06 AM
Subject: Re: [c-nsp] 1841 suitable for BGP?


> On 29.08.2006 01:01 Tony Varriale wrote
>
>>>From a memory standpoint you will be fine.
>>
>> But, you may want to check your CPU utilization...ave and peak.  5 full 
>> tables would crush a 1841's cpu...even 1 would give it a run for it's 
>> peak money.  Then add in 20mbps of throughput?  Possibly add in any bells 
>> and whistles?  Assuming we are talking about Cisco's 1841...there is no 
>> way.
>>
>
> gw001#cpu
> CPU utilization for five seconds: 3%/0%; one minute: 7%; five minutes: 6%
>
> I have to admit that this box is not doing much traffic. Only up to 10Mbps 
> in total ...
>
> -- 
> Arnold Nipper, AN45
>