[c-nsp] 1841 suitable for BGP?

[Arnold Nipper]

On 29.08.2006 17:39 Tony Varriale wrote

> sh proc cpu hist?
> 


http://private.nipper.de/show-proc-cpu-hist.txt

> ----- Original Message ----- 
> From: "Arnold Nipper" <arnold at nipper.de>
> To: "Tony Varriale" <tvarriale at comcast.net>
> Cc: <peter at whole-uk.com>; <cisco-nsp at puck.nether.net>
> Sent: Tuesday, August 29, 2006 10:06 AM
> Subject: Re: [c-nsp] 1841 suitable for BGP?
> 
> 
>> On 29.08.2006 01:01 Tony Varriale wrote
>>
>>>>From a memory standpoint you will be fine.
>>>
>>> But, you may want to check your CPU utilization...ave and peak.  5 full 
>>> tables would crush a 1841's cpu...even 1 would give it a run for it's 
>>> peak money.  Then add in 20mbps of throughput?  Possibly add in any bells 
>>> and whistles?  Assuming we are talking about Cisco's 1841...there is no 
>>> way.
>>>
>>
>> gw001#cpu
>> CPU utilization for five seconds: 3%/0%; one minute: 7%; five minutes: 6%
>>
>> I have to admit that this box is not doing much traffic. Only up to 10Mbps 
>> in total ...
>>
>> -- 
>> Arnold Nipper, AN45
>> 
> 


-- 
Arnold Nipper, AN45