[c-nsp] T1 MLPPP causing OSPF to crash

Chris Lane clane1875 at gmail.com
Wed Aug 30 13:13:12 EDT 2006


I have bonded two t1's yesterday using MLPPP, and today the customer is
testing the link. We have a 2620 at the customer facility and a 7206VXR at
our facility. When the customer went to test the link, it caused our 7206 to
crash OSPF with our backbone.
Here is a snapshot of our logs:
Aug 30 12:05:37.786 EDT: Se1/0:0 MLP: O frag C0005507 size 85 direct
Aug 30 12:05:37.794 EDT: Se1/0:0 MLP: I frag 80004C28 size 90 direct
Aug 30 12:05:37.794 EDT: Se1/1:1 MLP: I frag 40004C29 size 90 direct
Aug 30 12:05:37.818 EDT: Se1/1:1 MLP: O frag C0005508 size 86 direct
Aug 30 12:05:37.830 EDT: Se1/0:0 MLP: I frag 80004C2A size 96 direct
Aug 30 12:05:37.830 EDT: Se1/1:1 MLP: I frag 40004C2B size 97 direct
Aug 30 12:05:37.854 EDT: Se1/0:0 MLP: O frag C0005509 size 86 direct
Aug 30 12:05:37.866 EDT: Se1/0:0 MLP: I frag 80004C2C size 96 direct
Aug 30 12:05:37.866 EDT: Se1/1:1 MLP: I frag 40004C2D size 98 direct
Aug 30 12:05:37.890 EDT: Se1/1:1 MLP: O frag C000550A size 87 direct
Aug 30 12:05:37.898 EDT: Se1/0:0 MLP: I frag 80004C2E size 96 direct
Aug 30 12:05:37.898 EDT: Se1/1:1 MLP: I frag 40004C2F size 97 direct
Aug 30 12:05:37.926 EDT: Se1/0:0 MLP: O frag C000550B size 87 direct
Aug 30 12:05:37.934 EDT: Se1/0:0 MLP: I frag 80004C30 size 96 direct
Aug 30 12:05:37.934 EDT: Se1/1:1 MLP: I frag 40004C31 size 97 direct
Aug 30 12:05:37.958 EDT: Se1/1:1 MLP: O frag C000550C size 87 direct
Aug 30 12:05:37.966 EDT: Se1/0:0 MLP: I frag 80004C32 size 96 direct
Aug 30 12:05:37.966 EDT: Se1/1:1 MLP: I frag 40004C33 size 97 direct
Aug 30 12:05:37.990 EDT: Se1/0:0 MLP: O frag C000550D size 87 direct
Aug 30 12:05:37.998 EDT: Se1/0:0 MLP: I frag 80004C34 size 96 direct
Aug 30 12:05:37.998 EDT: Se1/1:1 MLP: I frag 40004C35 size 97 direct
Aug 30 12:05:49.357 EDT: Se1/1:1 MLP: O frag C000550E size 86
Aug 30 12:05:50.085 EDT: %OSPF-5-ADJCHG: Process 32623, Nbr 216.57.90.82 on
FastEthernet0/0.1000 from LOADING to FULL, Loading Done
Aug 30 12:05:59.365 EDT: Se1/0:0 MLP: O frag C000550F size 86
Aug 30 12:06:08.065 EDT: Se1/1:1 MLP: O frag C0005510 size 58 direct
Aug 30 12:06:08.069 EDT: Se1/0:0 MLP: I frag C0004C36 size 50 direct
Aug 30 12:06:08.585 EDT: Se1/0:0 MLP: O frag C0005511 size 58 direct

Here is my config
interface Multilink1
 ip address x.x.x.x/x
 ip flow ingress
 no cdp enable
 ppp multilink
 multilink-group 1
 no clns route-cache

interface Serial1/0:0
  no ip address
 ip flow ingress
 encapsulation ppp
 no fair-queue
 ppp authorization NOAUTH
 ppp multilink
 multilink-group 1
 no clns route-cache
!
interface Serial1/1:1
 no ip address
 encapsulation ppp
 no fair-queue
 ppp authorization NOAUTH
 ppp multilink
 multilink-group 1
 no clns route-cache

Any suggestions?
-- 
********************
* Chris Lane      *
* 401.662.1875  *
* ******************


More information about the cisco-nsp mailing list