[c-nsp] 6509-E slots

[Tim Stevenson]

There is no reasoning for this chassis - it can go in any slot as 
long as the sup is in slot 5 or slot 6.

Tim

At 10:50 AM 8/30/2006 +0100, Mark Tohill vociferated:
>Hello,
>
>We have a couple of 6509-E's with a 6748-GE -TX linecard in each. I 
>believe these are fabric enabled cards and there fore can connect 
>directly to the crossbar on the single Sup720's.
>
>Can any one explain to me the reasoning for positioning of the 
>linecard (excluding slot 5 where Sup720 is)?
>
>Thanks,
>Mark
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.