[c-nsp] vrf newby question

[Ahmad Cheikh-Moussa]

Hi!

> I *think* (have never tried EIGRP in a vrf-lite setup as you're using
> it) that you need a config like this where you use a single parent
> process and specify the EIGRP ASN in the VRF context via the
> "autonomous-system" command:
> 
> router eigrp 1
>  !
>  address-family ipv4 vrf VPN
>  redistribute connected
>  network 10.0.1.0 0.0.0.255
>  autonomous-system 100
>  no auto-summary
>  exit-address-family
>  !
>  address-family ipv4 vrf internet
>  redistribute connected
>  network 10.0.0.0 0.0.0.255
>  autonomous-system 200
>  no auto-summary
>  exit-address-family
> !
> 
> can you try this out?
I will try this tomorrow.
I also will try the test via BGP like David described.

> 
> How far does EIGRP go in your setup? Do you see any neighbor?
Unfortunately no. I can not see any neighbor.
The strange thing is that eirp not listen on any interface
mpls01#sh ip eigrp vrf VPN interfaces
mpls01#

Regards,
 Ahmad

-- 
Ahmad Cheikh-Moussa 
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/