[c-nsp] "IP addresses may not be configured on L2 links" FastEthernet interfaces

[Ed Ronayne]

Dany,
	put the IP address on he SVI vlan1

Ed


On Thu, 2006-12-07 at 08:01 -0500, Danny wrote:
> New Cisco 815. Four FastEthernet interfaces, and I simply would like to
> configure an IP address on one of them, however, the following error message
> is produced when I attempt to configure an IP address: IP addresses may not
> be configured on L2 links.
> 
> I imagine this is a simple fix, however, I will post the whole configuration
> if necessary. Is show running-config still the best or is there a public
> mailing list friendly output?
> 
> Thanks,
> 
> ...D
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/