[c-nsp] "IP addresses may not be configured on L2 links" FastEthernet interfaces

[Shakeel Ahmad]

You need to make it via a Vlan interface....

L2 Ethernet card take IP address via VLAns

Try it out if you need config i'll send it later


On 12/7/06, Danny <nocmonkey at gmail.com> wrote:
>
> New Cisco 815. Four FastEthernet interfaces, and I simply would like to
> configure an IP address on one of them, however, the following error
> message
> is produced when I attempt to configure an IP address: IP addresses may
> not
> be configured on L2 links.
>
> I imagine this is a simple fix, however, I will post the whole
> configuration
> if necessary. Is show running-config still the best or is there a public
> mailing list friendly output?
>
> Thanks,
>
> ...D
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>