[c-nsp] "IP addresses may not be configured on L2 links" FastEthernet interfaces

[Danny]

Thanks everyone... the solution was to configure the vlan 1 interface as
opposed to each individual FastEthernet interface because the first four are
L2 switch ports. All or nothing on this model.

...D

On 12/7/06, Danny <nocmonkey at gmail.com> wrote:
>
> New Cisco 815. Four FastEthernet interfaces, and I simply would like to
> configure an IP address on one of them, however, the following error message
> is produced when I attempt to configure an IP address: IP addresses may
> not be configured on L2 links.
>
> I imagine this is a simple fix, however, I will post the whole
> configuration if necessary. Is show running-config still the best or is
> there a public mailing list friendly output?
>
> Thanks,
>
> ...D
>



-- 
CPDE - Certified Petroleum Distribution Engineer
CCBC - Certified Canadian Beer Consumer