[c-nsp] Inserting 6704 card in 6500 causes reboot?

[Jared Mauch]

	did you configure it to write a core file?

	it appears you are using the modular software (yay!) so it should
be possible to have it write a core file to the disk if this
happens again.

	- jared

On Thu, Dec 07, 2006 at 10:09:06PM -0000, Ed Butler wrote:
> Sukumar, there is indeed a crashinfo file timestamped at the time of the
> reboot. The relevant part from this file seems to be:
> ==========================================
> pid = 24600: (sbin/ios-base), terminated due to signal SIGQUIT, Quit
> (Signal from user). Active = Thread 3
> ==========================================
> 
> Gary, I was the one that pushed it in and did so fairly quickly. Not a
> great fan of having the moisture sucked out of me so spend as little
> time as possible on the data floor.

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.