[c-nsp] Dot1q trunk on 6509

[Rene Rotella]

Hello, 

Try:

interface <id> 
 no ip address
 switchport
 switchport trunk encapsulation dot1q
 switchport trunk native vlan <vlan id>
 switchport trunk allowed vlan <vlan id's>
 switchport mode trunk



Bye,
Rene Rotella





"Voll, Scott" <Scott.Voll at wesd.org> 
Sent by: cisco-nsp-bounces at puck.nether.net
12/12/06 02:27 PM

To
<cisco-nsp at puck.nether.net>
cc

Subject
[c-nsp] Dot1q trunk on 6509






I'm trying to setup a port on my 6509 on a WS-X6148-GE-TX to be a 802.1q
trunk.  But I try to add switchport trunk encap dot1q and it won't take
it.  Am I Configuring it incorrectly?

 

Ver 12.2.18sxf4

 

TIA

 

Scott

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/